From: Scott Morris (swm@xxxxxxxxxx)
Date: Fri May 17 2002 - 10:36:49 GMT-3
You'll want "isdn incoming voice modem" just like you put... Because
the analog calls will be detected as voice calls.
Now, with that, you'll need two separate virtual interfaces. A
"Group-Async" to handle the analog calls and a "dialer" interface to
handle the digital ones.
There are plenty of samples and explanations on CCO. A fairly detailed
set can be found at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/asqcg/qc
isdn.htm
Hope that helps.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Graham, John
Sent: Friday, May 17, 2002 4:05 AM
To: 'ccielab@groupstudy.com'
Subject: ISDN PRI, dial up users and digital modems
Hi,
I am trying to get both ISDN and 56k users to be able to dial into the
channelized E1 interface on a 3640 and authenticate via radius.
The config works because the 56k users can, but when and ISDN user tries
to authenticate there is a ppp error and the connection is dropped.
I have put the "ISDN incoming-voice modem" command in and then tried
"ISDN incoming-voice data" on the S1/0:15 int. Neither made a
difference.
Does anyone have experience of this ? A working config would be greatly
appreciated.
I am using IP unnumbered on the E1 and a group-async interface.
I would be greatful for any help because I am getting close to throwing
the 3640 out of the window.
************************************************************************
********************
" This message contains information that may be privileged or
confidential and
is the property of the Cap Gemini Ernst & Young Group. It is intended
only for
the person to whom it is addressed. If you are not the intended
recipient, you
are not authorized to read, print, retain, copy, disseminate,
distribute, or use
this message or any part thereof. If you receive this message in error,
please
notify the sender immediately and delete all copies of this message ".
************************************************************************
********************
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:59 GMT-3