ISDN PRI, dial up users and digital modems

From: Graham, John (john.graham@xxxxxxxx)
Date: Fri May 17 2002 - 05:04:30 GMT-3

   
Hi,

I am trying to get both ISDN and 56k users to be able to dial into the
channelized E1 interface on a 3640 and authenticate via radius.

The config works because the 56k users can, but when and ISDN user tries to
authenticate there is a ppp error and the connection is dropped.

I have put the "ISDN incoming-voice modem" command in and then tried "ISDN
incoming-voice data" on the S1/0:15 int. Neither made a difference.

Does anyone have experience of this ? A working config would be greatly
appreciated.

I am using IP unnumbered on the E1 and a group-async interface.

I would be greatful for any help because I am getting close to throwing the
3640 out of the window.

*******************************************************************************
*************
" This message contains information that may be privileged or confidential and
is the property of the Cap Gemini Ernst & Young Group. It is intended only for
the person to whom it is addressed. If you are not the intended recipient, you
are not authorized to read, print, retain, copy, disseminate, distribute, or us
e
this message or any part thereof. If you receive this message in error, please
notify the sender immediately and delete all copies of this message ".
*******************************************************************************
*************

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:59 GMT-3