From: Hansang Bae (hbae@xxxxxxxxxx)
Date: Thu May 16 2002 - 01:17:10 GMT-3
At 04:49 AM 5/16/2002 +0100, kevin mitnick wrote:
>Hansang,
>
>Even with the maximim-path set , I still get two
>routes to default with only one prefered. Here is a
>"show ip route" I captured from rouer A
>Gateway of last resort is 165.21.200.9 to network
>0.0.0.0
>
>[snip]
>00:01:36, Serial0.2
>O*E2 0.0.0.0/0 [110/1] via 165.21.200.9, 00:01:36,Serial0.2
> [110/1] via 165.21.200.14, 00:01:37,Serial0.3
It will do two by default (as I recall) and you will only require "max-path" if
you want more than 2 (up to 6). But I see two routes to 0/0....
Remember it's not like BGP output.... there isn't a ">".
The output above is saying you can get to 0/0 via s0.2 *AND* S0.3.
With fast-switching turned on, it will round robin between the two based on the
destination IP address' cache. If you're using CEF, source/destination tuple
will determine which interface is used.
hsb
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:58 GMT-3