From: Phil (ciscostudent1@xxxxxxxxxxxx)
Date: Wed May 15 2002 - 01:38:41 GMT-3
The best way to understand ISDN is to configure it on a lab environment. You n
eed the "ppp multilink " cmd to enable the interface to use both B channels (12
8Kbps instead of 64Kbps) in the same call. The "dialer load-threshold" cmd will
tell the router when to enable the second channel, i.e., depending on the load
on the first channel you may want or not to enable the second.
Phil
Jeongwoo Park <jpark@wams.com> escreveu: Hi,
After studying on ISDN, I have an impression on isdn., which is 'isdn
dialer-threshold and ppp multilink shouldn't be configured together under
bri or dialer interface because they conceptually contradict each other.
The former is used to bring up the additional interface and the latter is
used to bond two separate link together.
I haven't' test those two in the lab, but it would look like stupid
configuration if you configure those together.
What is your thought?
JP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:56 GMT-3