bridging + ATM

From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Mon May 13 2002 - 22:37:14 GMT-3

Next message: steven owen: "Re: How to see a route 's tag value?"
Previous message: Venki: "Two Default Routes which path?"
Next in thread: Jason Sinclair: "RE: bridging + ATM"
Maybe reply: Jason Sinclair: "RE: bridging + ATM"
Maybe reply: Nick Shah: "Re: bridging + ATM"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Guys,

Can someone help me here, I am doing a simple transparent bridging over ATM
... Now can someone tell me if I *have* to use "protocol bridge broad" under
the PVC config or not...(ps. there are ethernet interfaces on both the
routers which are a part of bridge group as well)

R13..

interface ATM0
ip address 11.1.1.1 255.255.255.0
pvc 0/112
   protocol ip 11.1.1.2 broadcast
  protocol ipx 14.000d.000d.000d broadcast
  oam-pvc manage
  encapsulation aal5snap
!
atm rate-queue 1 20
no atm ilmi-keepalive
sscop receive-window 14
ipx network 14
bridge-group 1
end

R14..
interface ATM0
ip address 11.1.1.2 255.255.255.0
pvc 2/211
  protocol ip 11.1.1.1 broadcast
  protocol ipx 14.000c.000c.000c
  oam-pvc manage
  encapsulation aal5snap
!
atm rate-queue 1 20
no atm ilmi-keepalive
sscop receive-window 14
ipx network 14
bridge-group 1
end

Thanks in advance
Nick

Next message: steven owen: "Re: How to see a route 's tag value?"
Previous message: Venki: "Two Default Routes which path?"
Next in thread: Jason Sinclair: "RE: bridging + ATM"
Maybe reply: Jason Sinclair: "RE: bridging + ATM"
Maybe reply: Nick Shah: "Re: bridging + ATM"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:56 GMT-3