From: Ian.C.Stong@xxxxxxxxxxxxxxx
Date: Thu May 09 2002 - 10:50:51 GMT-3
Can you also include a snip from your config for your BRI
interfaces.....
Do it behave as you desire when you remove the dynamic aspect of the
dlsw peering?
Ian Stong
-----Original Message-----
From: cphillips [mailto:cphillips@suscom.net]
Sent: Thursday, May 09, 2002 9:12 AM
To: ccielab
Subject: DLSW dynamic peer over ISDN with netbios clients..
Hello All,
I have been trying unsuccessfully to keep BRI interfaces down while
using
dynamic tcp peers betwwen two routers
connected by ISDN.
The peers are not forming a DLSW cir but are connecting intermittantly.
I found a dlsw netbios keepalive-filter command which has been apllied
to
both dlsw peers.
the thing continues to come up and teh debug output indicates netbios
packsets
are causing it.
Routing protocols are not the isssue as I am using static routing.
Anyone see any issues or have any lucjk with a similiar config?
Here are the pertinent area of my configs..
R6
dlsw local-peer peer-id 15.15.6.6 promiscuous
dlsw remote-peer 0 tcp 15.15.5.5 keepalive 0 lsap-output-list 200
timeout 90
dynamic
access-list 200 permit 0xF0F0 0x0101
dlsw bridge-group 1
dlsw netbios-keepalive-filter
R5
dlsw local-peer peer-id 15.15.5.5
dlsw remote-peer 0 tcp 15.15.6.6 keepalive 0 lsap-output-list 200
timeout 90
dynamic
access-list 200 permit 0xF0F0 0x0101
dlsw bridge-group 1
dlsw netbios-keepalive-filter
Thanks,
Curtis
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:53 GMT-3