Re: Ls1010 config

From: MADMAN (dmadlan@xxxxxxxxx)
Date: Thu May 09 2002 - 10:51:31 GMT-3

• Next message: Joe Higgins: "Re: Redistribute ospf external route into igrp"
• Previous message: Ian.C.Stong@xxxxxxxxxxxxxxx: "RE: DLSW dynamic peer over ISDN with netbios clients.."
• Maybe in reply to: sanjay: "Ls1010 config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
  Here is a real basic config I have in the lab, several PVC between
ATM0/0/0 and atm0/0/1

interface ATM0/0/0
 no ip address
 no ip directed-broadcast
 no atm ilmi-keepalive
!
interface ATM0/0/1
 no ip address
 no ip directed-broadcast
 no atm ilmi-keepalive
 atm pvc 1 32 interface ATM0/0/0 1 32
 atm pvc 2 33 interface ATM0/0/0 2 33
 atm pvc 3 34 interface ATM0/0/0 3 34
 atm pvc 4 35 interface ATM0/0/0 4 35
 atm pvc 5 36 interface ATM0/0/0 5 36
 atm pvc 6 37 interface ATM0/0/0 6 37
 atm pvc 7 38 interface ATM0/0/0 7 38

  Dave

sanjay wrote:
>
> Anyone has a working LS1010 config and wouldn't mind sharing. I am trying to
> setup the LS1010 switch and have 2 routers connect to it.
>
> thanks,

• Next message: Joe Higgins: "Re: Redistribute ospf external route into igrp"
• Previous message: Ian.C.Stong@xxxxxxxxxxxxxxx: "RE: DLSW dynamic peer over ISDN with netbios clients.."
• Maybe in reply to: sanjay: "Ls1010 config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:53 GMT-3