From: dunne.brian@xxxxxxxxxxxx
Date: Tue Apr 30 2002 - 12:51:07 GMT-3
Hi--
I'm wondering if anyone knows of the below problem.
This is on a 7000 router, and I've tried several valid combinations of
config-register to avoid this process----after breaking from the boot
sequence. The "boot error" light on the RP goes on after each sequence.
I'll try any solutions suggested, just don't tell me this is hardware
related ; ) .....(e-bay )
Is there a config-register value I'm missing? Flash card is in the unit,
but I can not access it after break w/out the unit re-cycling.
Regards---
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) GS Software (GS7-J-M), Version 11.1(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Mon 05-Aug-96 17:00 by mkamson
Image text-base: 0x00001000, data-base: 0x00788EDC
Local Timeout (control reg=0xF910) Error, address: 0x4AFC4AFE at 0x1C811E
(PC)
boot: reset autoboot
System Bootstrap, Version 11.1(5), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
RP1 processor with 16384 Kbytes of main memory
boot: FASTBOOT disabled
boot: bootload_rp1(cisco2-rp1, 40000000, 2, F50)
boot: type indirect, booting [cisco2-rp1] via [rom] rxboot
boot: recursing bootload_rp1(rom, 0, 0, 0)
boot: type direct, method rom
boot: booting ROM image
boot: unpacking rom - 3924851
F3: 8668+3916151+165008 at 0x1000
boot: system_state [SYSTATE_BOOTING], ram_dispatch(2, 0xF50, 0x1000)
Self decompressing the image :
#################################################
###############################################################################
#
#################################### [OK]
Local Timeout (control reg=0xF910) Error, address: 0x4AFC4AFE at 0x1C811E
(PC)
Error in rxboot, trying ROM
boot: changing BOOTLDR from [] to default
System Bootstrap, Version 11.1(5), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
RP1 processor with 16384 Kbytes of main memory
boot: FASTBOOT disabled
boot: bootload_rp1(cisco2-rp1, 40000000, 2, F50)
boot: type indirect, booting [cisco2-rp1] via [rom] rxboot
boot: recursing bootload_rp1(rom, 0, 0, 0)
boot: type direct, method rom
boot: booting ROM image
boot: unpacking rom - 3924851
F3: 8668+3916151+165008 at 0x1000
boot: system_state [SYSTATE_BOOTING], ram_dispatch(2, 0xF50, 0x1000)
Self decompressing the image :
#################################################
###############################################################################
#
#################################### [OK]
Local Timeout (control reg=0xF910) Error, address: 0x4AFC4AFE at 0x1C811E
(PC)
Error in rxboot, trying ROM
boot: changing BOOTLDR from [] to default
System Bootstrap, Version 11.1(5), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
RP1 processor with 16384 Kbytes of main memory
boot: FASTBOOT disabled
boot: bootload_rp1(cisco2-rp1, 40000000, 2, F50)
boot: type indirect, booting [cisco2-rp1] via [rom] rxboot
boot: recursing bootload_rp1(rom, 0, 0, 0)
boot: type direct, method rom
boot: booting ROM image
boot: unpacking rom - 3924851
F3: 8668+3916151+165008 at 0x1000
boot: system_state [SYSTATE_BOOTING], ram_dispatch(2, 0xF50, 0x1000)
Self decompressing the image :
#################################################
###############################################################################
#
#################################### [OK]
Local Timeout (control reg=0xF910) Error, address: 0x4AFC4AFE at 0x1C811E
(PC)
Error in rxboot, trying ROM
boot: changing BOOTLDR from [] to default
System Bootstrap, Version 11.1(5), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
RP1 processor with 16384 Kbytes of main memory
boot: FASTBOOT disabled
boot: bootload_rp1(cisco2-rp1, 40000000, 2, F50)
boot: type indirect, booting [cisco2-rp1] via [rom] rxboot
boot: recursing bootload_rp1(rom, 0, 0, 0)
boot: type direct, method rom
boot: booting ROM image
boot: unpacking rom - 3924851
F3: 8668+3916151+165008 at 0x1000
boot: system_state [SYSTATE_BOOTING], ram_dispatch(2, 0xF50, 0x1000)
Self decompressing the image : ##################################
Abort at 0x1DBC (PC)
>^@^@^@^@^@
>
>
**** This is intended for the addressee only and may contain
confidential business information. It may not be copied
without our permission. If you are not the intended recipient,
please contact the sender as soon as possible and
delete the material from any computer.****
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:23 GMT-3