From: Thomas Trygar (trygar@xxxxxxxx)
Date: Wed Apr 24 2002 - 19:22:44 GMT-3
Frank,
router(config)# card type t1 1
Used on a 7206 router with PA-MC-8TE1+ modules in slot 1.
If you card supports either a T1 or E1 mode, above command should work.
Tom
Brian Dennis wrote:
> Frank,
> I've changed the MFT trunks on the 3810's from E1's to T1's before. If I
> remember right, it was a few years ago, I went into ROMMON mode and
> typed something along the lines of "trunk 0 t1" to switch it to a T1
> from an E1.
>
> I would be surprised if the hardware for the 8 port T1 module is any
> different than an 8 port E1 module.
>
> Brian Dennis, CCIE #2210 (R&S/ISP Dial)
> bdennis@5g.net
> 5G Networks, Inc.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Frank Kim
> Sent: Wednesday, April 24, 2002 1:45 PM
> To: ccielab@groupstudy.com
> Subject: OT: AS5350 T1/E1 question
>
> Hi Folks,
> I've heard that you can actually take a 8 port T1 module and do a
> firmware
> upgrade to convert it into a 8 port E1 module on an AS5350/AS5400
> router. Can anyone confirm if this is true or not? Thanks.
>
> -Frank
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:19 GMT-3