From: Steven Owen (trueccie@xxxxxxxxx)
Date: Mon Apr 22 2002 - 12:32:34 GMT-3
why does my dlsw circuit keep alive just one minute ?
how to control it ?
Thanks.
00:59:15: CSM: delete group cache for 0:6152:B924, group 0
00:59:15: CSM: delete group cache for WIN2000 , group 0
00:59:16: %DLSWC-3-RECVSSP: SSP OP = 10( INFO ) from peer 4.4.4.4(2065)
00:59:16: DLSw: 822083593 decr r - s:26 so:0 r:23 ro:0
00:59:16: DLSw: START-FSM (822083593): event:WAN-INFO state:CONNECTED
00:59:16: DLSw: core: dlsw_action_m()
00:59:16: DISP Sent : CLSI Msg : DATA.Req dlen: 34
00:59:17: DLSw: END-FSM (822083593): state:CONNECTED->CONNECTED
00:59:17: %DLSWC-3-RECVSSP: SSP OP = 14( HLTQ ) from peer 4.4.4.4(2065)
00:59:17: DLSw: START-FSM (822083593): event:WAN-HLTQ state:CONNECTED
00:59:17: DLSw: core: dlsw_action_o()
00:59:17: DISP Sent : CLSI Msg : DISCONNECT.Req dlen: 4
00:59:17: DLSw: END-FSM (822083593): state:CONNECTED->HALT_PENDING
00:59:17: DLSW Received-ctlQ : CLSI Msg : DISCONNECT.Cfm CLS_OK dlen: 8
00:59:17: DLSw: START-FSM (822083593): event:DLC-Disc.Cnf state:HALT_PENDING
00:59:17: DLSw: core: dlsw_action_p()
00:59:17: %DLSWC-3-SENDSSP: SSP OP = 15( HLTR ) to peer 4.4.4.4(2065) success
00:59:17: DISP Sent : CLSI Msg : CLOSE_STN.Req dlen: 4
00:59:17: DLSw: END-FSM (822083593): state:HALT_PENDING->CLOSE_PEND
00:59:17: DLSW Received-ctlQ : CLSI Msg : CLOSE_STN.Cfm CLS_OK dlen: 8
00:59:17: DLSw: START-FSM (822083593): event:DLC-CloseStn.Cnf state:CLOSE_PEND
00:59:17: DLSw: core: dlsw_action_y()
00:59:17: DLSw: 822083593 to dead queue
00:59:17: DLSw: START-TPFSM (peer 4.4.4.4(2065)): event:CORE-DELETE CIRCUIT sta
te:CONNECT
00:59:17: DLSw: dtp_action_v(), peer delete circuit for peer 4.4.4.4(2065)
00:59:17: DLSw: END-TPFSM (peer 4.4.4.4(2065)): state:CONNECT->CONNECT
00:59:17: DLSw: END-FSM (822083593): state:CLOSE_PEND->DISCONNECTED
|:"f
|g-J+~7&!"\"fv7,1+a6Zy
_rj(}J&
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:16 GMT-3