From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sun Apr 21 2002 - 21:59:48 GMT-3
If ur doing IRB with the tokenrings then u should be using SRT on TR
interfaces....
Lupi let us see ur config ... i am interested in see that on TR...
And i am sure it will work if it is SRT
-Mamoor
----- Original Message -----
From: Lupi, Guy <Guy.Lupi@eurekaggn.com>
To: 'Bob Sinclair' <bsin@erols.com>
Cc: <ccielab@groupstudy.com>
Sent: Monday, April 22, 2002 4:43 AM
Subject: RE: IRB with OSPF/EIGRP
> Really!?!? That is strange, with the exception of the OSPF/EIGRP thing,
it
> is working just as I would expect it to work. Where did you see that it
> wasn't supported? Not that I don't believe you, I just want to take a
look,
> because it seems to be working.
>
> ~-----Original Message-----
> ~From: Bob Sinclair [mailto:bsin@erols.com]
> ~Sent: Sunday, April 21, 2002 6:58 PM
> ~To: Lupi, Guy
> ~Cc: ccielab@groupstudy.com
> ~Subject: Re: IRB with OSPF/EIGRP
> ~
> ~
> ~Guy,
> ~
> ~If I understand you correctly, you want to do IRB with Token
> ~Ring interfaces. This is not supported.
> ~
> ~-Bob
> ~
> ~----- Original Message -----
> ~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
> ~To: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>; <ccielab@groupstudy.com>
> ~Sent: Sunday, April 21, 2002 3:44 PM
> ~Subject: RE: IRB with OSPF/EIGRP
> ~
> ~
> ~> Ok, I have it working now with IRB, but it is on Ethernet.
> ~Same setup as
> ~> below, but the routers below I described before are token
> ~ring. So I have
> ~> it working with IRB using all Ethernet, but it doesn't seem
> ~to work with IRB
> ~> when it is all token ring. Any ideas?
> ~>
> ~> ~-----Original Message-----
> ~> ~From: Lupi, Guy
> ~> ~Sent: Sunday, April 21, 2002 3:05 PM
> ~> ~To: 'ccielab@groupstudy.com'
> ~> ~Subject: IRB with OSPF/EIGRP
> ~> ~
> ~> ~
> ~> ~I have a setup like below, and I was trying to run OSPF or
> ~> ~EIGRP between the
> ~> ~two routers that are in the bridge group and the BVI router,
> ~> ~but I couldn't
> ~> ~get it to work until I used tunnels. Has anyone gotten
> ~OSPF or EIGRP
> ~> ~working with IRB without using tunnels? Thanks.
> ~> ~
> ~> ~
> ~> ~
> ~> ~ r6
> ~> ~ BVI
> ~> ~ / \
> ~> ~ / \
> ~> ~ r3 r4
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:15 GMT-3