From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Sun Apr 21 2002 - 21:02:29 GMT-3
Ok, I see what you are saying. I am using SRT though, so it should work. I
will play around with it more later, thank you for the link.
~-----Original Message-----
~From: Bob Sinclair [mailto:bsin@erols.com]
~Sent: Sunday, April 21, 2002 8:01 PM
~To: Lupi, Guy
~Cc: ccielab@groupstudy.com
~Subject: Re: IRB with OSPF/EIGRP
~
~
~Guy,
~
~A reasonable question, I should have documented. The
~statement below stuck in my head (I tend to equate SRB and
~Token Ring, so maybe too broad).
~
~"Integrated routing and bridging is supported for transparent
~bridging, but not for source-route bridging (SRB)."
~
~Taken from this link on the DOC CD:
~
~http://127.0.0.1:8080/cc/td/doc/product/software/ios121/121cgcr
~/ibm_c/bcprt1/bcdtb.htm#xtocid186944
~
~I suppose it may work with SRT on the Token Ring, so perhaps
~my statement was a bit broad.
~
~-Bob
~
~
~
~----- Original Message -----
~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
~To: "'Bob Sinclair'" <bsin@erols.com>
~Cc: <ccielab@groupstudy.com>
~Sent: Sunday, April 21, 2002 7:43 PM
~Subject: RE: IRB with OSPF/EIGRP
~
~
~> Really!?!? That is strange, with the exception of the
~OSPF/EIGRP thing, it
~> is working just as I would expect it to work. Where did you
~see that it
~> wasn't supported? Not that I don't believe you, I just want
~to take a look,
~> because it seems to be working.
~>
~> ~-----Original Message-----
~> ~From: Bob Sinclair [mailto:bsin@erols.com]
~> ~Sent: Sunday, April 21, 2002 6:58 PM
~> ~To: Lupi, Guy
~> ~Cc: ccielab@groupstudy.com
~> ~Subject: Re: IRB with OSPF/EIGRP
~> ~
~> ~
~> ~Guy,
~> ~
~> ~If I understand you correctly, you want to do IRB with Token
~> ~Ring interfaces. This is not supported.
~> ~
~> ~-Bob
~> ~
~> ~----- Original Message -----
~> ~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
~> ~To: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>; <ccielab@groupstudy.com>
~> ~Sent: Sunday, April 21, 2002 3:44 PM
~> ~Subject: RE: IRB with OSPF/EIGRP
~> ~
~> ~
~> ~> Ok, I have it working now with IRB, but it is on Ethernet.
~> ~Same setup as
~> ~> below, but the routers below I described before are token
~> ~ring. So I have
~> ~> it working with IRB using all Ethernet, but it doesn't seem
~> ~to work with IRB
~> ~> when it is all token ring. Any ideas?
~> ~>
~> ~> ~-----Original Message-----
~> ~> ~From: Lupi, Guy
~> ~> ~Sent: Sunday, April 21, 2002 3:05 PM
~> ~> ~To: 'ccielab@groupstudy.com'
~> ~> ~Subject: IRB with OSPF/EIGRP
~> ~> ~
~> ~> ~
~> ~> ~I have a setup like below, and I was trying to run OSPF or
~> ~> ~EIGRP between the
~> ~> ~two routers that are in the bridge group and the BVI router,
~> ~> ~but I couldn't
~> ~> ~get it to work until I used tunnels. Has anyone gotten
~> ~OSPF or EIGRP
~> ~> ~working with IRB without using tunnels? Thanks.
~> ~> ~
~> ~> ~
~> ~> ~
~> ~> ~ r6
~> ~> ~ BVI
~> ~> ~ / \
~> ~> ~ / \
~> ~> ~ r3 r4
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:15 GMT-3