From: Geoffrey KIM (Geoffrey.KIM@xxxxxxxxx)
Date: Sun Apr 21 2002 - 04:38:47 GMT-3
Hi Larry,
Does going back and forth with the tab key really do the trick, or is it
just a way of killing the time as if it is doing something...? ;-)
Thanks anyway,
Geoffrey
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> Behalf Of Larry Roberts
> Sent: Sunday, April 21, 2002 4:16 PM
> To: Geoffrey KIM; Gerd Thuemmler
> Cc: ccielab@groupstudy.com
> Subject: Re: How to configure Cat3900
>
>
> Hi Guys,
>
> All you need to do is tab to the end of the menu and select
> Return to save
> your changes. You can then go back into the IP address menu
> and ping! No
> need to wait, no need to reboot.
>
> HTH,
> Larry Roberts
> CCIE #7886 (R&S, Security)
>
> ----- Original Message -----
> From: "Geoffrey KIM" <Geoffrey.KIM@iname.com>
> To: "Gerd Thuemmler" <gerd.thuemmler@berlin.de>
> Cc: <ccielab@groupstudy.com>
> Sent: Saturday, April 20, 2002 9:13 PM
> Subject: RE: How to configure Cat3900
>
>
> > Hi Gerd,
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> > > Behalf Of Gerd Thuemmler
> > ... snip...
> > > >5) assign a ip to the 3900 switch and default gateway
> pointing to the
> > > >router.
> > >
> > > ..you must reset the switch
> > >
> >
> > Any reason why you want to reset the switch? Certainly you
> need to wait
> > for a while until you'll be able to send pings across, but you don't
> > really need to reset the switch.
> >
> > Cheers,
> > Geoffrey
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:15 GMT-3