From: Larry Roberts (larryr@xxxxxxxxxxxx)
Date: Sun Apr 21 2002 - 13:28:10 GMT-3
Hi Geoffrey,
The problem is that the 3920 doesn't save the changes until select Return
and go back to the previous screen. So, if you set the IP address
parameters, you can't ping until you save the changes by selecting Return
and going back to the previous screen. You can then go back to the IP
address and you should be able to ping instantly.
Sincerely,
Larry Roberts
CCIE #7886 (R&S, Security)
----- Original Message -----
From: "Geoffrey KIM" <Geoffrey.KIM@iname.com>
To: "Larry Roberts" <larryr@inetbeam.net>
Cc: <ccielab@groupstudy.com>; "Gerd Thuemmler" <gerd.thuemmler@berlin.de>
Sent: Sunday, April 21, 2002 12:38 AM
Subject: RE: How to configure Cat3900
> Hi Larry,
>
> Does going back and forth with the tab key really do the trick, or is it
> just a way of killing the time as if it is doing something...? ;-)
>
> Thanks anyway,
> Geoffrey
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> > Behalf Of Larry Roberts
> > Sent: Sunday, April 21, 2002 4:16 PM
> > To: Geoffrey KIM; Gerd Thuemmler
> > Cc: ccielab@groupstudy.com
> > Subject: Re: How to configure Cat3900
> >
> >
> > Hi Guys,
> >
> > All you need to do is tab to the end of the menu and select
> > Return to save
> > your changes. You can then go back into the IP address menu
> > and ping! No
> > need to wait, no need to reboot.
> >
> > HTH,
> > Larry Roberts
> > CCIE #7886 (R&S, Security)
> >
> > ----- Original Message -----
> > From: "Geoffrey KIM" <Geoffrey.KIM@iname.com>
> > To: "Gerd Thuemmler" <gerd.thuemmler@berlin.de>
> > Cc: <ccielab@groupstudy.com>
> > Sent: Saturday, April 20, 2002 9:13 PM
> > Subject: RE: How to configure Cat3900
> >
> >
> > > Hi Gerd,
> > >
> > > > -----Original Message-----
> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> > > > Behalf Of Gerd Thuemmler
> > > ... snip...
> > > > >5) assign a ip to the 3900 switch and default gateway
> > pointing to the
> > > > >router.
> > > >
> > > > ..you must reset the switch
> > > >
> > >
> > > Any reason why you want to reset the switch? Certainly you
> > need to wait
> > > for a while until you'll be able to send pings across, but you don't
> > > really need to reset the switch.
> > >
> > > Cheers,
> > > Geoffrey
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:15 GMT-3