From: Ludwig Morales (lud.morales@xxxxxxxxxxxxxx)
Date: Sun Apr 21 2002 - 14:51:40 GMT-3
I Just wanted to know if its posible to configure an async interface for
dial out and dial in, i have the fallowing configuration bub as soon as i
apply the "peer default ip address pool dialer" on the async interface it
becomes unable to dial outside whenever.
Is this the righ way to do it?
interface Async8
ip address 192.168.8.233 255.255.255.0
encapsulation ppp
dialer in-band
dialer map ip 192.168.8.2 broadcast 2201212
dialer-group 1
async mode dedicated
no peer default ip address
ppp authentication chap
!
ip local pool dialer 192.168.8.10 192.168.8.20
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.8.2
ip http server
!
dialer-list 1 protocol ip permit
!
!
line con 0
line 1 8
script dialer dial
login local
modem InOut
modem autoconfigure discovery
transport input all
autoselect during-login
autoselect ppp
line aux 0
line vty 0 4
login
!
end
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:15 GMT-3