From: Larry Roberts (larryr@xxxxxxxxxxxx)
Date: Sun Apr 21 2002 - 04:15:30 GMT-3
Hi Guys,
All you need to do is tab to the end of the menu and select Return to save
your changes. You can then go back into the IP address menu and ping! No
need to wait, no need to reboot.
HTH,
Larry Roberts
CCIE #7886 (R&S, Security)
----- Original Message -----
From: "Geoffrey KIM" <Geoffrey.KIM@iname.com>
To: "Gerd Thuemmler" <gerd.thuemmler@berlin.de>
Cc: <ccielab@groupstudy.com>
Sent: Saturday, April 20, 2002 9:13 PM
Subject: RE: How to configure Cat3900
> Hi Gerd,
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> > Behalf Of Gerd Thuemmler
> ... snip...
> > >5) assign a ip to the 3900 switch and default gateway pointing to the
> > >router.
> >
> > ..you must reset the switch
> >
>
> Any reason why you want to reset the switch? Certainly you need to wait
> for a while until you'll be able to send pings across, but you don't
> really need to reset the switch.
>
> Cheers,
> Geoffrey
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:15 GMT-3