From: yakout esmat (yesmat@xxxxxxxxxxxxxx)
Date: Wed Apr 17 2002 - 08:56:27 GMT-3
Hi all,
I have a concept problem with PPP Multilink in BRI Interface.
Cisco Documentation states:
1) Don't have to use "PPP Multilink" to bring up the second BRI link when
needed, only "dialer load-threshold <n>" command is enough to do that, and
in this case we have to use "bandwidth" command to specify the interface
bandwidth so that Load-threshold can cancalculate the load on the first link
before bringing up the second one.
2) If we use "PPP Multilink" command, "dialer load-threshold 1 " command can
no longer bring up both links
My findings contradict all that.
No difference between configuring "PPP Multilink" or not, I can still bring
up the other link by only using "dialer load-threshold <n>"
I must be missing the point, can any body share views on this one.
Appreciate your help in advance.
Cheers from beautiful Sydney
Ya
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:11 GMT-3