From: Harish DV/peakxv (harish.dv@xxxxxxxxxx)
Date: Mon Apr 15 2002 - 23:31:48 GMT-3
Well,
8000 bytes is 8kbps!.
Regards,
Harish D V
www.peakxv.net
"ying chang"
<ying_c@hotmail.c To: johnnyt@netcat.com, st
even.j.nelson@bt.com, ccielab@groupstudy.com
om> cc:
Sent by: Subject: RE: CAR
nobody@groupstudy
.com
04/15/2002 06:46
PM
Please respond to
"ying chang"
Can you tell us how you calculate bps, burst-normal and burst-max? I know
sometimes these numbers are given, but if you take the 56k circuit as an
example, if burst-normal is 8000 bytes, isn't that exceeded 56k bps
already?
>From: "Johnny Tsao" <johnnyt@netcat.com>
>Reply-To: "Johnny Tsao" <johnnyt@netcat.com>
>To: <steven.j.nelson@bt.com>, <ccielab@groupstudy.com>
>Subject: RE: CAR
>Date: Mon, 15 Apr 2002 17:21:28 -0700
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios111/cc111/car.ht
>m#xtocid2554214
>
>
>int e1/0
>----------56k-----------
>rate-limit input access-group 100 48000 8000 16000 conform-action transmit
>exceed-action drop
>rate-limit output access-group 100 48000 8000 16000 conform-action
transmit
>exceed-action drop
>
>int e1/1
>----------128k----------
>rate-limit input access-group 100 120000 8000 16000 conform-action
transmit
>exceed-action drop
>rate-limit output access-group 100 120000 8000 16000 conform-action
>transmit
>exceed-action drop
>
>int e1/2
>----------256k----------
>rate-limit input access-group 100 248000 8000 16000 conform-action
transmit
>exceed-action drop
>rate-limit output access-group 100 248000 8000 16000 conform-action
>transmit
>exceed-action drop
>
>int e1/3
>----------512k----------
>rate-limit input access-group 100 504000 8000 16000 conform-action
transmit
>exceed-action drop
>rate-limit output access-group 100 504000 8000 16000 conform-action
>transmit
>exceed-action drop
>
>access-list 100 permit ip any any
>access-list 100 permit tcp any any
>access-list 100 permit udp any any
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>steven.j.nelson@bt.com
>Sent: Monday, April 15, 2002 5:49 AM
>To: ccielab@groupstudy.com
>Subject: CAR
>
>
>Hi All,
>
>Can someone please post a CAR config with some "Idiot Proof" Notes, I have
>some LLQ stuff which I believe is similar, but I need to look at CAR in
>general.
>
>Thanks
>
>Steve
>
>Steve Nelson
>Customer Engineer
>BT Ignite- National Solutions
>T: +44 (0)1422 338881 M: +44 (0)7811 944172
>e-mail: steven.j.nelson@bt.com
>pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> > British Telecommunications plc
> > Registered office: 81 Newgate Street London EC1A 7AJ
> > Registered in England no. 1800000.
> > This electronic message contains information from British
>Telecommunications plc which may be privileged or confidential. The
>information is intended to be for the use of the individual(s) or entity
>named above. If you are not the intended recipient be aware that any
>disclosure, copying, distribution or use of the contents of this
>information
>is prohibited. If you have received this electronic message in error,
>please
>notify us by telephone or email (to the numbers or address above)
>immediately.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:09 GMT-3