From: Jeffrey Theobalt (jeff@xxxxxxx)
Date: Tue Apr 16 2002 - 00:01:29 GMT-3
on the ethernet interface of r1, you put the IP helper-address command on
the interface nearest the device requesting DHCP in your case the eth0
interface of R1.
Hope this helps...
-Jeff
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Alex Paulino
Sent: Monday, April 15, 2002 5:21 PM
To: ccielab@groupstudy.com
Subject: Ip helper-address in DHCP Relay
Folks, using the follow "topology":
--R0_Eth0--| Router0 | -R0_S0-------------PPP--------------R1_S0 | Router1 |
-----R1_Eth0
I just have configured DHCP server on Router 0, and i have dhcp Wks clients
in
R1_Eth0.
My question is: Where i must to configure the "ip helper-address X.y.z.w"
command and "ip dhcp-server x.y.z.w" command for suplly the ip address to
Workstations on R1_eth0 ?
thanks
alex
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:09 GMT-3