From: Landon Fitts (l.fitts@xxxxxxxxxxxxxx)
Date: Mon Apr 15 2002 - 21:56:32 GMT-3
Configure the "ip helper-address x.y.z.w" on the R1_Eth0, and the x.y.z.w
should be a reachable
address on R0.
Regards,
Landon Fitts
CCNP, CCDP, NNCSE, NNCDE
l.fitts@mindspring.com
----- Original Message -----
From: "Alex Paulino" <Alex@2s.com.br>
To: <ccielab@groupstudy.com>
Sent: Monday, April 15, 2002 8:21 PM
Subject: Ip helper-address in DHCP Relay
> Folks, using the follow "topology":
>
> --R0_Eth0--| Router0 | -R0_S0-------------PPP--------------R1_S0 | Router1
|
> -----R1_Eth0
>
> I just have configured DHCP server on Router 0, and i have dhcp Wks
clients in
> R1_Eth0.
>
> My question is: Where i must to configure the "ip helper-address X.y.z.w"
> command and "ip dhcp-server x.y.z.w" command for suplly the ip address to
> Workstations on R1_eth0 ?
>
>
> thanks
>
> alex
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:08 GMT-3