From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Mon Apr 15 2002 - 22:49:04 GMT-3
Ip helper-address are placed at the router which is not dhcp server and will
be pointing to the dhcp server..
have a look at this ..
See the diagram the bottom
http://www.cisco.com/warp/public/779/smbiz/service/knowledge/tcpip/dhcp.htm
-Mamoor
----- Original Message -----
From: Alex Paulino <Alex@2s.com.br>
To: <ccielab@groupstudy.com>
Sent: Tuesday, April 16, 2002 5:21 AM
Subject: Ip helper-address in DHCP Relay
> Folks, using the follow "topology":
>
> --R0_Eth0--| Router0 | -R0_S0-------------PPP--------------R1_S0 | Router1
|
> -----R1_Eth0
>
> I just have configured DHCP server on Router 0, and i have dhcp Wks
clients in
> R1_Eth0.
>
> My question is: Where i must to configure the "ip helper-address X.y.z.w"
> command and "ip dhcp-server x.y.z.w" command for suplly the ip address to
> Workstations on R1_eth0 ?
>
>
> thanks
>
> alex
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:08 GMT-3