DSLW direct encap --Peer disconnected--Drives me crazy.

From: Jeongwoo Park (jpark@xxxxxxxx)
Date: Sat Apr 13 2002 - 03:02:44 GMT-3


   
Ok DLSW gurus.
DLSW over frame relay is not working.
I saw your discussions on posts.
I couldn't decide which way was correct way because too many conflict
opinions against each other and cisco doc were there
So, I tested it out myself. I couldn't get it to work. I tried different
kinds of combination, such as with pass-thru, w/o pass-thru, with frame-map
dlsw and with frame-relay llce. No luck, so I am asking your help.

I had TCP encap over FR working, but no luck on direct encap nor on dlsw
lite.
ether-router------------------------------------------------router-ether
                                  frame-relay
Take a look at my config.

What am I missing.

hostname HQ
!
logging buffered 99999 debugging
enable secret 5 $1$y2he$lnUO
 enable password xxxx
!
clock timezone PST -8
ip subnet-zero
no ip domain-lookup
!
!dlsw local-peer peer-id 1.1.1.1
dlsw remote-peer 0 frame-relay interface Serial0/0 110
dlsw bridge-group 1
!
interface Loopback0
 ip address 1.1.1.1 255.255.255.255
!
interface FastEthernet0/0
 ip address 192.22.22.254 255.255.255.0
 speed 100
 full-duplex
 bridge-group 1
!
interface Serial0/0
 no ip address
 encapsulation frame-relay
 no fair-queue
 service-module t1 timeslots 1-8
!
interface Serial0/0.110 point-to-point
 description Connection to Salinas_New
 ip address 10.0.5.1 255.255.255.252
 no arp frame-relay
 frame-relay interface-dlci 110
!
!
bridge 1 protocol ieee

---------------------------------------------

hostname Branch
!
logging buffered 4096 debugging
enable password 7 06110
!
memory-size iomem 25
ip subnet-zero
no ip finger
no ip domain-lookup
!
dlsw local-peer peer-id 10.0.5.2
dlsw remote-peer 0 frame-relay interface Serial0/0 100
!
!
!
interface FastEthernet0/0
 ip address 10.100.5.2 255.255.255.0
 duplex auto
 speed auto
 bridge-group 1
!
interface Serial0/0
 ip address 10.0.5.2 255.255.255.252
 encapsulation frame-relay
 no fair-queue
 service-module t1 timeslots 1-8
 frame-relay interface-dlci 100
!
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.0.5.1
no ip http server
!
bridge 1 protocol ieee



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:07 GMT-3