From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Fri Apr 12 2002 - 04:47:04 GMT-3
Ur have just miss typed a tini-mini thing :
dlsw remote-peer 0 frame-relay interface Serial0/0 110
instead u should use
dlsw remote-peer 0 frame-relay interface Serial0/0.110 110
As the dlci 110 is maped at s0/0.110.
Now try all ur combinations...
Happy dlswing......
-Mamoor
----- Original Message -----
From: Jeongwoo Park <jpark@wams.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, April 13, 2002 11:02 AM
Subject: DSLW direct encap --Peer disconnected--Drives me crazy.
> Ok DLSW gurus.
> DLSW over frame relay is not working.
> I saw your discussions on posts.
> I couldn't decide which way was correct way because too many conflict
> opinions against each other and cisco doc were there
> So, I tested it out myself. I couldn't get it to work. I tried different
> kinds of combination, such as with pass-thru, w/o pass-thru, with
frame-map
> dlsw and with frame-relay llce. No luck, so I am asking your help.
>
> I had TCP encap over FR working, but no luck on direct encap nor on dlsw
> lite.
> ether-router------------------------------------------------router-ether
> frame-relay
> Take a look at my config.
>
> What am I missing.
>
>
> hostname HQ
> !
> logging buffered 99999 debugging
> enable secret 5 $1$y2he$lnUO
> enable password xxxx
> !
> clock timezone PST -8
> ip subnet-zero
> no ip domain-lookup
> !
> !dlsw local-peer peer-id 1.1.1.1
> dlsw remote-peer 0 frame-relay interface Serial0/0 110
> dlsw bridge-group 1
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.255
> !
> interface FastEthernet0/0
> ip address 192.22.22.254 255.255.255.0
> speed 100
> full-duplex
> bridge-group 1
> !
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> no fair-queue
> service-module t1 timeslots 1-8
> !
> interface Serial0/0.110 point-to-point
> description Connection to Salinas_New
> ip address 10.0.5.1 255.255.255.252
> no arp frame-relay
> frame-relay interface-dlci 110
> !
> !
> bridge 1 protocol ieee
>
> ---------------------------------------------
>
> hostname Branch
> !
> logging buffered 4096 debugging
> enable password 7 06110
> !
> memory-size iomem 25
> ip subnet-zero
> no ip finger
> no ip domain-lookup
> !
> dlsw local-peer peer-id 10.0.5.2
> dlsw remote-peer 0 frame-relay interface Serial0/0 100
> !
> !
> !
> interface FastEthernet0/0
> ip address 10.100.5.2 255.255.255.0
> duplex auto
> speed auto
> bridge-group 1
> !
> interface Serial0/0
> ip address 10.0.5.2 255.255.255.252
> encapsulation frame-relay
> no fair-queue
> service-module t1 timeslots 1-8
> frame-relay interface-dlci 100
> !
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 10.0.5.1
> no ip http server
> !
> bridge 1 protocol ieee
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:07 GMT-3