From: Sudhanshu Gupta (sudhanshu.gupta@xxxxxxxxxxx)
Date: Wed Apr 10 2002 - 06:40:43 GMT-3
Jack, check this out.
http://www.cisco.com/warp/customer/788/voip/direct_inward_dial.html
Hope this helps.
-sudhanshu
> -----Original Message-----
> From: Jack S [SMTP:prospectccie@yahoo.com]
> Sent: Wednesday, April 10, 2002 3:25 AM
> To: ccielab@groupstudy.com
> Subject: Voice: Direct-inward-dial
>
> Hi,
>
> I couldn't figure out the functionality of
> Direct-inward-dial. Once I configure it on the
> incoming pots dial-peer, I am not even getting a
> dial-tone. Can anyone throw some light on the
> functionality of this command?
>
> I thought this command is required for 2-stage dialing
> (getting a second dial-tone). Is my understanding
> correct. If so, can anyonle please tell me how to get
> thsi working?
>
> Thanks,
> Jack
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:03 GMT-3