From: Jack S (prospectccie@xxxxxxxxx)
Date: Wed Apr 10 2002 - 15:54:12 GMT-3
Hi Sudhanshu,
Looks like DID applies to FXO port only. This solves
part of the problem.
Any idea how to get the second dial-tone?
Thanks,
Jack
--- Sudhanshu Gupta <sudhanshu.gupta@wipro.co.in>
wrote:
> Jack, check this out.
>
http://www.cisco.com/warp/customer/788/voip/direct_inward_dial.html
>
> Hope this helps.
> -sudhanshu
>
> > -----Original Message-----
> > From: Jack S [SMTP:prospectccie@yahoo.com]
> > Sent: Wednesday, April 10, 2002 3:25 AM
> > To: ccielab@groupstudy.com
> > Subject: Voice: Direct-inward-dial
> >
> > Hi,
> >
> > I couldn't figure out the functionality of
> > Direct-inward-dial. Once I configure it on the
> > incoming pots dial-peer, I am not even getting a
> > dial-tone. Can anyone throw some light on the
> > functionality of this command?
> >
> > I thought this command is required for 2-stage
> dialing
> > (getting a second dial-tone). Is my understanding
> > correct. If so, can anyonle please tell me how to
> get
> > thsi working?
> >
> > Thanks,
> > Jack
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:04 GMT-3