From: sameer shah (sameer_ccie@xxxxxxxxxxx)
Date: Wed Apr 10 2002 - 04:58:18 GMT-3
Hi David
As per frame-relay config for subinterfaces considered for any routed
protocol, As per my understanding FRAD connected to frame-relay switch &
gets DLCI associated to physical interface not the sub-interface. So If you
create ant sub-interface ie point-to-point or point-tomultipoint.. you need
to associate DLCI to specific subinterface. which can be done by 2 methods
1. frame-relay map &
2. frame-relay interface-dlci
So as per concept, Its obvious that it won't be working for IP as well as
IPX
Regards
Sameer
> Simple IPX stuff for most of you.. I have IPX RIP disabled on all
routers.
> IPX EIGRP enabled on all routers advertising all networks.
>
> R2 has S0.254 point-to-multipoint connecting to R5 and R6. Via frame
relay
> cloud.
>
> R2
> / \
> R5 R6
>
> R5 & R6 are not using subinterfaces. Do I have to use the frame-relay
map
> IPX command on all the routers in order for them to form IPX EIGRP
neighbor
> relationships?
>
> My IPexpert lab 19 says that I don't based upon the sample configs.
However
> I can not make the IPX EIGRP relationships form without putting in the
> Frame-relay map IPX statements.....
>
> Thanks,
>
> David
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:03 GMT-3