From: MADMAN (dmadlan@xxxxxxxxx)
Date: Fri Apr 05 2002 - 11:46:59 GMT-3
Also If you have redundant SUPs you will only get output from the
active.
Dave
Scott Morris wrote:
>
> Depends on what type of cable you have in it. :)
>
> The 6500's can do either straight-through or rolled. There's a little hole
> next to the port, you can use a paper clip to select which method is being
> used.
>
> I am assuming that this is what you mean when you say you don't see anything
> while booting (or does it miraculously appear after it's booted?)
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Ma Gang
> Sent: Friday, April 05, 2002 12:54 AM
> To: ccielab@groupstudy.com
> Subject: Catalyst 6506 problem
>
> Dear All,
>
> We meet a Catalyst 6506 problem here. The symptom is the CONSOLE shows
> nothing when the 6506 is booting. The console is configed as 9600/8/N/1. No
> matter how I press the keyboard, it still shows nothing.
>
> Anyone here met this problem before, and how to solve it?
>
> Thanks in advance.
>
> Regards
>
> Matthew Ma
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:56 GMT-3