From: Ali Fahmi (afahmi@xxxxxxxxx)
Date: Fri Apr 05 2002 - 11:45:57 GMT-3
I susppected on routerb should use promiscuous mode
so the config on routerb should be like this,
dlsw local-peer peer-id 135.5.6.6 promiscuous
dlsw promp-peer-default keepalive 0
dlsw bridge-group 1
rgds.
Ali
On Fri, 5 Apr 2002 03:13:20 +0900
"Jonghwan Hyon" <jerry@datacraft-korea.com> wrote:
> hi, group!
>
> i configure dlsw dynamic peer, but the peer connected
> constantly on remote site!
>
> is it normal operation?
>
> here is my configuration.
>
> routera#sh conf
>
> dlsw local-peer peer-id 135.5.1.1
> dlsw remote-peer 0 tcp 135.5.6.6 keepalive 0 timeout
> 90 dynamic inactivity 3
> dlsw bridge-group 1
>
> routera#sh dlsw peer
> Peers: state pkts_rx pkts_tx
> type drops ckts TCP uptime
> TCP 135.5.6.6 DISCONN 0 0
> dynam 0 0 - -
> Total number of connected peers: 0
> Total number of connections: 0
>
>
> routerb#sh conf
> dlsw local-peer peer-id 135.5.6.6
> dlsw remote-peer 0 tcp 135.5.1.1 keepalive 0 timeout
> 90
> dlsw bridge-group 1
>
> routerb#sh dlsw peer
> Peers: state pkts_rx pkts_tx
> type drops ckts TCP uptime
> TCP 135.5.1.1 CONNECT 2 2
> conf 0 0 0 00:02:02
>
>
> thanks, regards,
>
> ***********************************************
> Jonghwan Hyon(Jerry), CCNP/CCDP/CCSI
> Manager
> Technical Service/Taejon Branch Office
>
> Datacraft Korea, Inc.
> 320-150, Room #309 Expotel Bldg
> 381 Man-nyun-dong, Seo-Gu, Taejon, Korea
>
> Tel : 8242-487-4272
> Fax : 8242-487-4273
> Mobile : 8211-437-8883
> e-mail : jerry@datacraft-korea.com
> ***********************************************
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:56 GMT-3