From: Balaji Siva (bsivasub@xxxxxxxxx)
Date: Fri Apr 05 2002 - 11:18:32 GMT-3
Does the same PC/console cable work on any other CISCO devices ?
Do you see any bent pin in the console port ?
If you can telnet in, get the following
show config
show proc cpu
show netstat
sh logging buffer -1023
i think it is physical layer issue !!!
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ma Gang
Sent: Friday, April 05, 2002 9:07 AM
To: 'ccielab'
Subject: ??: Catalyst 6506 problem
Many thanks to all the people who helped. My situation is
1. Super Engine II
2. Use normal console (roll over) cable
3. It worked fine last week. Same PC, same console cable.
4. Now the console shows nothing, no reaction when press any key.
Matthew Ma
-----ee'
i.d;6-----
ed;6d::: George Stylianou [mailto:georges@is.co.za]
eif6i4: Friday, April 05, 2002 12:02 AM
f6d;6d::: 'Ma Gang'
d8;i": RE: Catalyst 6506 problem
Are you using a straight through cable or a Cisco console cable?
> -----Original Message-----
> From: Ma Gang [mailto:matthen@zisco.com.cn]
> Sent: 05 April 2002 07:54
> To: ccielab@groupstudy.com
> Subject: Catalyst 6506 problem
>
> Dear All,
>
> We meet a Catalyst 6506 problem here. The symptom is the CONSOLE shows
> nothing when the 6506 is booting. The console is configed as 9600/8/N/1.
> No
> matter how I press the keyboard, it still shows nothing.
>
> Anyone here met this problem before, and how to solve it?
>
> Thanks in advance.
>
>
>
> Regards
>
> Matthew Ma
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:56 GMT-3