From: jeff gercken (jeffgercken@xxxxxxxxxxx)
Date: Fri Apr 05 2002 - 11:20:54 GMT-3
Have you confirmed cable/computer on another piece of hardware? Did you
change the PC at all? Maybe COMx is now unavailable. On the 6000's the
DCE/DTE button is out for straight-through, in for rollover.
-Jeff
>From: Ma Gang <matthen@zisco.com.cn>
>Reply-To: Ma Gang <matthen@zisco.com.cn>
>To: "'ccielab'" <ccielab@groupstudy.com>
>Subject: g-e$
: Catalyst 6506 problem
>Date: Fri, 5 Apr 2002 22:06:43 +0800
>
>Many thanks to all the people who helped. My situation is
>
>1. Super Engine II
>
>2. Use normal console (roll over) cable
>
>3. It worked fine last week. Same PC, same console cable.
>
>4. Now the console shows nothing, no reaction when press any key.
>
>
>
>Matthew Ma
>
>-----ee'i.d;6-----
>ed;6d::: George Stylianou [mailto:georges@is.co.za]
>eif6i4: Friday, April 05, 2002 12:02 AM
>f6d;6d::: 'Ma Gang'
>d8;i": RE: Catalyst 6506 problem
>
>
>
>Are you using a straight through cable or a Cisco console cable?
>
>
> > -----Original Message-----
> > From: Ma Gang [mailto:matthen@zisco.com.cn]
> > Sent: 05 April 2002 07:54
> > To: ccielab@groupstudy.com
> > Subject: Catalyst 6506 problem
> >
> > Dear All,
> >
> > We meet a Catalyst 6506 problem here. The symptom is the CONSOLE shows
> > nothing when the 6506 is booting. The console is configed as 9600/8/N/1.
> > No
> > matter how I press the keyboard, it still shows nothing.
> >
> > Anyone here met this problem before, and how to solve it?
> >
> > Thanks in advance.
> >
> >
> >
> > Regards
> >
> > Matthew Ma
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:56 GMT-3