From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Sun Mar 31 2002 - 13:23:55 GMT-3
Yes, I have multilink and ppp authentication configured and they work
without the encapsulation on the physical interface.
~-----Original Message-----
~From: Ronny Jonathan [mailto:rjonathan@yahoo.com]
~Sent: Sunday, March 31, 2002 11:06 AM
~To: ccielab@groupstudy.com
~Subject: Re: ISDN question
~
~
~Have you tried to put ppp parameters like authentication,
~multilink, etc ?
~Is it working also ?
~
~Regards,
~Ronny
~
~----- Original Message -----
~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
~To: "'Ronny Jonathan'" <rjonathan@yahoo.com>; <ccielab@groupstudy.com>
~Sent: Sunday, March 31, 2002 11:03 PM
~Subject: RE: ISDN question
~
~
~> I see your logic, but I have never had to use the encapsulation ppp
~command
~> on the bri interface regardless of whether it was for
~inbound or outbound
~> calls. I am in the lab right now and I have it set up, it
~is working fine
~> without the encapsulation on the physical interface. The
~bri interface
~> shows hdlc encapsulation, but the b channels and dialer
~interface show
~ppp.
~> I also have a host route on both the incoming and outgoing
~routers, which
~> would indicate to me that they are actually running ppp.
~>
~>
~> ~-----Original Message-----
~> ~From: Ronny Jonathan [mailto:rjonathan@yahoo.com]
~> ~Sent: Sunday, March 31, 2002 9:42 AM
~> ~To: ccielab@groupstudy.com
~> ~Subject: Re: ISDN question
~> ~
~> ~
~> ~The ppp encap on the BRI (physical interface) is needed when
~> ~the your dialer interface was configured for incoming call.
~> ~
~> ~When there is an incoming call, the physical interface will receive
~> ~the call before the call can be associated with the dialer
~interface.
~> ~
~> ~If your dialer interfaces were only for outgoing calls, you need not
~> ~configured ppp encap on the physical (BRI) interface.
~> ~
~> ~Regards,
~> ~Ronny
~> ~----- Original Message -----
~> ~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
~> ~To: <ccielab@groupstudy.com>
~> ~Sent: Sunday, March 31, 2002 8:53 PM
~> ~Subject: ISDN question
~> ~
~> ~
~> ~> I have noticed in certain sample configs on CCO that when
~> ~using dialer
~> ~> interfaces, ppp encapsulation is specified on both the
~BRI and on the
~> ~dialer
~> ~> interface. I have found that I don't need to have it on the BRI
~> ~interface,
~> ~> at least not in any of the configs that I have done. Does
~> ~anyone know if
~> ~it
~> ~> is required to have the ppp encap specified on the BRI in certain
~> ~situations
~> ~> when using dialer interfaces? Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:27 GMT-3