From: Ronny Jonathan (rjonathan@xxxxxxxxx)
Date: Sun Mar 31 2002 - 13:06:20 GMT-3
Have you tried to put ppp parameters like authentication, multilink, etc ?
Is it working also ?
Regards,
Ronny
----- Original Message -----
From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
To: "'Ronny Jonathan'" <rjonathan@yahoo.com>; <ccielab@groupstudy.com>
Sent: Sunday, March 31, 2002 11:03 PM
Subject: RE: ISDN question
> I see your logic, but I have never had to use the encapsulation ppp
command
> on the bri interface regardless of whether it was for inbound or outbound
> calls. I am in the lab right now and I have it set up, it is working fine
> without the encapsulation on the physical interface. The bri interface
> shows hdlc encapsulation, but the b channels and dialer interface show
ppp.
> I also have a host route on both the incoming and outgoing routers, which
> would indicate to me that they are actually running ppp.
>
>
> ~-----Original Message-----
> ~From: Ronny Jonathan [mailto:rjonathan@yahoo.com]
> ~Sent: Sunday, March 31, 2002 9:42 AM
> ~To: ccielab@groupstudy.com
> ~Subject: Re: ISDN question
> ~
> ~
> ~The ppp encap on the BRI (physical interface) is needed when
> ~the your dialer interface was configured for incoming call.
> ~
> ~When there is an incoming call, the physical interface will receive
> ~the call before the call can be associated with the dialer interface.
> ~
> ~If your dialer interfaces were only for outgoing calls, you need not
> ~configured ppp encap on the physical (BRI) interface.
> ~
> ~Regards,
> ~Ronny
> ~----- Original Message -----
> ~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
> ~To: <ccielab@groupstudy.com>
> ~Sent: Sunday, March 31, 2002 8:53 PM
> ~Subject: ISDN question
> ~
> ~
> ~> I have noticed in certain sample configs on CCO that when
> ~using dialer
> ~> interfaces, ppp encapsulation is specified on both the BRI and on the
> ~dialer
> ~> interface. I have found that I don't need to have it on the BRI
> ~interface,
> ~> at least not in any of the configs that I have done. Does
> ~anyone know if
> ~it
> ~> is required to have the ppp encap specified on the BRI in certain
> ~situations
> ~> when using dialer interfaces? Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:27 GMT-3