From: steven.j.nelson@xxxxxx
Date: Fri Mar 29 2002 - 14:50:43 GMT-3
All,
I have the following
R1(AS254)-------R10(AS1)-------R3(AS1)--Frame_Cloud--R6(AS1)--R7(AS1)
Basically R1 is ebgp to r10, then ibgp to r3, R6 and R7 are reflector
clients of r3 in peer group "peers", next hop self is set for the peer group
at R3 (As is remote AS, RR Client etc etc)
The problem is that the next hop isn't being changed at R3 for the peers in
the group even though I have the commands :-
neighbor peers peer-group
neighbor peers remote-as 1
neighbor peers route-reflector-client
neighbor peers next-hop-self
neighbor peers update source loopback 0
neighbor x.x.x.x peer-group peers .... and so on for all routers in the peer
group
All IGP functionality is fine and loopbacks are being advertised to every
router in the workgroup, so reachability isn't an issue.
Any thoughts.
Thanks
Steve
Steve Nelson
Customer Engineer
BT Ignite- National Solutions
T: +44 (0)1422 338881 M: +44 (0)7811 944172
e-mail: steven.j.nelson@bt.com
pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> British Telecommunications plc
> Registered office: 81 Newgate Street London EC1A 7AJ
> Registered in England no. 1800000.
> This electronic message contains information from British
Telecommunications plc which may be privileged or confidential. The
information is intended to be for the use of the individual(s) or entity
named above. If you are not the intended recipient be aware that any
disclosure, copying, distribution or use of the contents of this information
is prohibited. If you have received this electronic message in error, please
notify us by telephone or email (to the numbers or address above)
immediately.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:25 GMT-3