From: Phil (ciscostudent1@xxxxxxxxxxxx)
Date: Mon Mar 25 2002 - 11:56:47 GMT-3
Glen,I used this config last week and it works fine. Be aware that if you forge
t to config bridging you'll see the DLSw peers connected but no traffic will go
through.Phil- Procedure to Test DLSW -R1 ----- R2 ----- R3 ----- R4Dlsw is con
figured between R2 and R3R1 is pretending to be the Mainframe/FEPR4 is pretendi
ng to be the client/PU2Config in R1:!dspu host FEP xid-snd 06060606 rmac 0000.0
c19.39c9 rsap 4 lsap 4!interface FastEthernet0/1.151 mac-address 0007.0eb4.9ec1
(has to be bit swaped config in R4) no ip address (if between 2et
h or 2token no swap needed) dspu enable-host lsap 4 dspu start FEPConfig in R4:
!dspu pu PU2 rmac 00e0.702d.7983 rsap 4 lsap 4!interface TokenRing1 mac-address
0000.3098.9c93 (has to be bit swaped to config in R1) no ip address
(if between 2eth or 2token no swap needed) ring-speed 4 dspu enable-pu lsap
4 dspu start PU2Testing:R1#sh dspu pu FEPdspu host FEP Fa0/1 PU STATUS Active
RMAC 0000.0c19.39c9 RSAP 4 LSAP 4 XID 06060606 RETRIES 255 RETRY_TIMEOU
T 30 WINDOW 7 MAXIFRAME 1472 ACT BUFFERS 0 SAP ACT BUFFERS 0 FRAMES
RECEIVED 1 FRAMES SENT 1 LUs USED BY DSPU 0 LUs ACTIVE 0 LUs USED BY A
PI 0 LUs ACTIVE 0 LUs ACTIVATED BY HOST BUT NOT USED 0R4#sh dspu pu PU2dspu
pu PU2 TokenRing1 PU STATUS Active RMAC 00e0.702d.7983 RSAP 4 LSAP 4
XID 06060606 RETRIES 4 RETRY_TIMEOUT 30 WINDOW 7 MAXIFRAME 1472 ACT BUF
FERS 0 SAP ACT BUFFERS 0 FRAMES RECEIVED 1 FRAMES SENT 1 LUs USED BY DS
PU 0 LUs ACTIVE 0 LUs USED BY API 0 LUs ACTIVE 0 LUs ACTIVATED BY HOST
BUT NOT USED 0 --- "Williams, Glenn" escreveu: > Does anyone have a working co
nfig to test SNA over dlsw. I'm trying to> test> using those DSPU commands wit
h four routers over DLSW. Just looking for> a> simple config that works. Can'
t get mine to work. Mine looks something> like below. DLSW is up and I can se
e R1 and R4 by doing a "show dlsw> rea"> at R2 or R3. FWIW I go all this DSPU
host client stuff to work over a> transparent bridge and I know to covert the m
ac addresses in my DSPU> commands for the below scenario. But if someone has s
ome working stuff> it> would sure help to save some hours.> > [R1 - DSPU Client
] -----ethernet-----[R2 dlsw router] -----tcp> connection-----[R3 dlsw router]-
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:21 GMT-3