From: Gerd Thuemmler (gerd.thuemmler@xxxxxxxxx)
Date: Mon Mar 25 2002 - 12:37:33 GMT-3
Hi Phil,
At 15:56 25.03.2002, Phil wrote:
>Glen,I used this config last week and it works fine. Be aware that if you
>forget to config bridging you'll see the DLSw peers connected but no
>traffic will go through.Phil- Procedure to Test DLSW -R1 ----- R2 ----- R3
>----- R4Dlsw is configured between R2 and R3R1 is pretending to be the
>Mainframe/FEPR4 is pretending to be the client/PU2Config in R1:!dspu host
>FEP xid-snd 06060606 rmac 0000.0c19.39c9 rsap 4 lsap 4!interface
>FastEthernet0/1.151 mac-address 0007.0eb4.9ec1 (has to be bit swaped
>config in R4) no ip address (if between 2eth or 2token no
>swap needed) dspu enable-host lsap 4 dspu start FEPConfig in R4:!dspu pu
>PU2 rmac 00e0.702d.7983 rsap 4 lsap 4!interface TokenRing1 mac-address
>0000.3098.9c93 (has to be bit swaped to config in R1) no ip
>address (if between 2eth or 2token no swap needed) ring-speed
>4 dspu enable-pu lsap 4 dspu start PU2Testing:R1#sh dspu pu FEPdspu host
>FEP Fa0/1 PU STATUS Active RMAC 0000.0c19.39c9 RSAP 4 LSAP 4 X!
>ID 06060606 RETRIES 255 RETRY_TIMEOUT 30 WINDOW 7 MAXIFRAME
>1472 ACT BUFFERS 0 SAP ACT BUFFERS 0 FRAMES RECEIVED 1 FRAMES SENT
>1 LUs USED BY DSPU 0 LUs ACTIVE 0 LUs USED BY API 0 LUs ACTIVE
>0 LUs ACTIVATED BY HOST BUT NOT USED 0R4#sh dspu pu PU2dspu pu PU2
>TokenRing1 PU STATUS Active RMAC 00e0.702d.7983 RSAP 4 LSAP 4 XID
>06060606 RETRIES 4 RETRY_TIMEOUT 30 WINDOW 7 MAXIFRAME 1472 ACT
>BUFFERS 0 SAP ACT BUFFERS 0 FRAMES RECEIVED 1 FRAMES SENT 1 LUs
>USED BY DSPU 0 LUs ACTIVE 0 LUs USED BY API 0 LUs ACTIVE 0 LUs
>ACTIVATED BY HOST BUT NOT USED 0 --- "Williams, Glenn" escreveu: > Does
>anyone have a working config to test SNA over dlsw. I'm trying to> test>
>using those DSPU commands with four routers over DLSW. Just looking for>
>a> simple config that works. Can't get mine to work. Mine looks
>something> like below. DLSW is up and I can see R1 and R4 by doing a
>"show dlsw> rea"> at R2 or R3. FWIW I go all this DSPU host cl!
>ient stuff to work over a> transparent bridge and I know to covert the mac
>addresses in my DSPU> commands for the below scenario. But if someone has
>some working stuff> it> would sure help to save some hours.> > [R1 - DSPU
>Client] -----ethernet-----[R2 dlsw router] -----tcp> connection-----[R3
>dlsw router]---ethernet----[R4 - DSPU Host]> > TIA> GW>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:21 GMT-3