From: Henry Chen (henrchen@xxxxxxxxx)
Date: Mon Mar 25 2002 - 12:23:41 GMT-3
"ospf auto-cost reference-bandwidth" under "router ospf" to change costs of eve
ry OSPF interface.
"Engelhard M. Labiro" <engelhard@netmarks.co.jp> wrote: Replying to my own e-
mail, I just remember another method
to influence an OSPF route`s cost. It is by using "bandwidth"
command under interface config mode. Remember that
a cost of an OSPF`s route is calculated by a formula of
100 000 000/bandwidth.
So far we have the following method to change an OSPF route`s
cost:
1. ip ospf cost (too easy)
2. bandwidth
3. redistribute connected metric-type (E1 or E2).
4. redistribute connected and tag the route, match the tag
and set its cost with a route-map (not tested )
5. any else ?
..................[deleted]...................
> I can only think the other way to change a route`s cost, is by
> tagging a route when you redistribute it, and match the tag
> and set its cost by using a route-map.
>
> Any other suggestion ?
>
> > Hi
> > That solved my problem many thanks for that. But I am trying
> > to do it by nother method. I tried to use policy routing but no
> > luck. How can achieve the same result using a differnet method?
..................[deleted]...................
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:21 GMT-3