From: Bernard Omrani (Bernard@xxxxxxxxxxxxxxx)
Date: Sun Mar 24 2002 - 04:28:29 GMT-3
You do not need to ping self in a production network, but in the lab it
is a good idea to have it. Especially, if you have the good habit of
creating a notepad for pingable interfaces.
Bernard Omrani
>
> is the "ping self" important. or we just can skip it.
> As my config and urs are just same except the self ping. anyways i
will
> try
> it.
>
> -Mamoor
>
> ----- Original Message -----
> From: Bernard <dollar@lvcm.com>
> To: <ccielab@groupstudy.com>
> Cc: 'Ahmed Mamoor Amimi' <mamoor@ieee.org>
> Sent: Saturday, March 23, 2002 10:57 PM
> Subject: RE: please help me out ATM
>
>
> > Copy & paste the following configs.
> > They come from a working configuration.
> > R1 uses the older version of IOS and R2 uses the new IOS.
> >
> > HTH
> >
> > Bernard
> >
> >
> > R1_7000# Version 11.3T
> > interface ATM2/0
> > ip address 10.100.1.1 255.255.255.0
> > map-group test-a
> > atm pvc 1 0 32 aal5snap
> > atm ilmi-keepalive
> >
> > map-list test-a
> > ip 10.100.1.1 atm-vc 1 broadcast o-- To ping self
> > ip 10.100.1.2 atm-vc 1 broadcast
> >
> >
> > R2_4700# Version 12.0
> > interface ATM0
> > ip address 10.100.1.2 255.255.255.0
> > pvc 0/32
> > protocol ip 10.100.1.1 broadcast
> > protocol ip 10.100.1.2 broadcast o To ping self
> >
> > LS1010
> >
> > interface ATM11/1/1 o connected to R1_7000
> > no ip address
> > no ip directed-broadcast
> > no atm ilmi-keepalive
> >
> > interface ATM11/1/2 o connected to R2_4700
> > no ip address
> > no ip directed-broadcast
> > no atm ilmi-keepalive
> > ! note: the following command needed on one interface only
> > atm pvc 0 32 interface ATM11/1/1 0 32
> >
> >
> > Bernard Omrani
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> > > Sent: Saturday, March 23, 2002 9:19 AM
> > > To: ccielab@groupstudy.com
> > > Subject: please help me out
> > >
> > > Dear folks.
> > >
> > > Its my first time on ATM so please help me out in this.... I
wanted to
> > > configure the some scenario for ATM by using the new commands but
> didn't
> > > work
> > > out then i tried the old one and here is the configuration. let me
> know
> if
> > > i
> > > did some thing wrong
> > >
> > > R4------Ls1010--------R6
> > >
> > >
> > > Switch
> > >
> > > interface ATM1/0/0
> > > no ip address
> > > no ip directed-broadcast
> > > logging event subif-link-status
> > > atm ilmi-keepalive
> > > !
> > > interface ATM1/0/1
> > > no ip address
> > > no ip directed-broadcast
> > > logging event subif-link-status
> > > atm ilmi-keepalive
> > > atm pvc 0 100 interface ATM1/0/0 0 100
> > > !
> > >
> > >
> > > R4
> > >
> > > interface ATM0
> > > ip address 192.168.1.1 255.255.255.0
> > > map-group baleegh
> > > atm pvc 1 0 100 aal5snap
> > > no atm ilmi-keepalive
> > > !
> > > ip classless
> > > no ip http server
> > > !
> > > !
> > > map-list baleegh
> > > ip 192.168.1.2 atm-vc 1 broadcast
> > >
> > > R6
> > >
> > > interface ATM0/0
> > > ip address 192.168.1.2 255.255.255.0
> > > map-group baleegh
> > > atm pvc 1 0 100 aal5snap
> > > no atm ilmi-keepalive
> > > !
> > > interface Ethernet2/0
> > > no ip address
> > > shutdown
> > > half-duplex
> > > !
> > > ip classless
> > > ip http server
> > > !
> > > !
> > > map-list baleegh
> > > ip 192.168.1.1 atm-vc 1 broadcast
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:20 GMT-3