From: Geoff Zinderdine (geoffz@xxxxxxx)
Date: Sat Mar 23 2002 - 22:28:24 GMT-3
Thank you to all that replied. Ctrl-^-b did the trick, but only *after*
I figured out that my keyboard was set to US(International), and set it
back to standard US keyboard. That was an interesting excursion into
terminal emulator RTFM!
Geoff Zinderdine
On Sun, 2002-03-24 at 01:23, Jeff K. wrote:
> Ctrl-Shift-6 B (Ctrl-^-B) works when you are reverse telnetting from your
> access server.
>
> HTH,
>
> -Jeff
>
> ----- Original Message -----
> From: "Geoff Zinderdine" <geoffz@mts.net>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, March 23, 2002 11:05 AM
> Subject: Sending Break
>
>
> > Can anyone point me in the direction of how to send break to a router
> > attached to my term server which I am telnetting into from my linux
> > workstation? I have tried all the usual combinations to no avail. Any
> > pointers to a good terminal program and a known working break sequence
> > will be much appreciated.
> >
> > Thank you.
> >
> > Geoff Zinderdine
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:20 GMT-3