From: Bernard (dollar@xxxxxxxx)
Date: Sat Mar 23 2002 - 14:57:45 GMT-3
Copy & paste the following configs.
They come from a working configuration.
R1 uses the older version of IOS and R2 uses the new IOS.
HTH
Bernard
R1_7000# Version 11.3T
interface ATM2/0
ip address 10.100.1.1 255.255.255.0
map-group test-a
atm pvc 1 0 32 aal5snap
atm ilmi-keepalive
map-list test-a
ip 10.100.1.1 atm-vc 1 broadcast o-- To ping self
ip 10.100.1.2 atm-vc 1 broadcast
R2_4700# Version 12.0
interface ATM0
ip address 10.100.1.2 255.255.255.0
pvc 0/32
protocol ip 10.100.1.1 broadcast
protocol ip 10.100.1.2 broadcast o To ping self
LS1010
interface ATM11/1/1 o connected to R1_7000
no ip address
no ip directed-broadcast
no atm ilmi-keepalive
interface ATM11/1/2 o connected to R2_4700
no ip address
no ip directed-broadcast
no atm ilmi-keepalive
! note: the following command needed on one interface only
atm pvc 0 32 interface ATM11/1/1 0 32
Bernard Omrani
> -----Original Message-----
> From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Sent: Saturday, March 23, 2002 9:19 AM
> To: ccielab@groupstudy.com
> Subject: please help me out
>
> Dear folks.
>
> Its my first time on ATM so please help me out in this.... I wanted to
> configure the some scenario for ATM by using the new commands but didn't
> work
> out then i tried the old one and here is the configuration. let me know if
> i
> did some thing wrong
>
> R4------Ls1010--------R6
>
>
> Switch
>
> interface ATM1/0/0
> no ip address
> no ip directed-broadcast
> logging event subif-link-status
> atm ilmi-keepalive
> !
> interface ATM1/0/1
> no ip address
> no ip directed-broadcast
> logging event subif-link-status
> atm ilmi-keepalive
> atm pvc 0 100 interface ATM1/0/0 0 100
> !
>
>
> R4
>
> interface ATM0
> ip address 192.168.1.1 255.255.255.0
> map-group baleegh
> atm pvc 1 0 100 aal5snap
> no atm ilmi-keepalive
> !
> ip classless
> no ip http server
> !
> !
> map-list baleegh
> ip 192.168.1.2 atm-vc 1 broadcast
>
> R6
>
> interface ATM0/0
> ip address 192.168.1.2 255.255.255.0
> map-group baleegh
> atm pvc 1 0 100 aal5snap
> no atm ilmi-keepalive
> !
> interface Ethernet2/0
> no ip address
> shutdown
> half-duplex
> !
> ip classless
> ip http server
> !
> !
> map-list baleegh
> ip 192.168.1.1 atm-vc 1 broadcast
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:19 GMT-3