From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sun Mar 24 2002 - 02:19:30 GMT-3
All the thinks that u have stated below , i have already done it.
1-changed the vpi on both side OK
2-show atm map , shows the binding OK
3-debuging shows packet sending ... OK (there is no encapsulation failure,
cell is going out)
4-on 1010 "show atm vc" shows vc UP OK
how what to do....
-Mamoor
----- Original Message -----
From: Mohamed I. Lubbad <mlubbad@hotmail.com>
To: Ahmed Mamoor Amimi <mamoor@ieee.org>; <ccielab@groupstudy.com>
Sent: Saturday, March 23, 2002 10:57 PM
Subject: Re: please help me out
> Try and configure different VPI/VCI numbers on both sides of the switch.
>
> interface atm 1/0/1
> atm pvc 0 426 interface atm 1/0/0 0 624
>
> Do a "show atm map" and try to debug to see if packets are leaving the ATM
> port or not.
>
> On the LS1010, do a " show atm vc" to make sure if the PVC you created is
> between the correct ATM ports on the switch and if it is UP or not.
>
>
> Mohamed I. Lubbad
>
>
> ----- Original Message -----
> From: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, March 23, 2002 20:18
> Subject: please help me out
>
>
> > Dear folks.
> >
> > Its my first time on ATM so please help me out in this.... I wanted to
> > configure the some scenario for ATM by using the new commands but didn't
> work
> > out then i tried the old one and here is the configuration. let me know
if
> i
> > did some thing wrong
> >
> > R4------Ls1010--------R6
> >
> >
> > Switch
> >
> > interface ATM1/0/0
> > no ip address
> > no ip directed-broadcast
> > logging event subif-link-status
> > atm ilmi-keepalive
> > !
> > interface ATM1/0/1
> > no ip address
> > no ip directed-broadcast
> > logging event subif-link-status
> > atm ilmi-keepalive
> > atm pvc 0 100 interface ATM1/0/0 0 100
> > !
> >
> >
> > R4
> >
> > interface ATM0
> > ip address 192.168.1.1 255.255.255.0
> > map-group baleegh
> > atm pvc 1 0 100 aal5snap
> > no atm ilmi-keepalive
> > !
> > ip classless
> > no ip http server
> > !
> > !
> > map-list baleegh
> > ip 192.168.1.2 atm-vc 1 broadcast
> >
> > R6
> >
> > interface ATM0/0
> > ip address 192.168.1.2 255.255.255.0
> > map-group baleegh
> > atm pvc 1 0 100 aal5snap
> > no atm ilmi-keepalive
> > !
> > interface Ethernet2/0
> > no ip address
> > shutdown
> > half-duplex
> > !
> > ip classless
> > ip http server
> > !
> > !
> > map-list baleegh
> > ip 192.168.1.1 atm-vc 1 broadcast
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:20 GMT-3