From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sat Mar 23 2002 - 14:18:41 GMT-3
Dear folks.
Its my first time on ATM so please help me out in this.... I wanted to
configure the some scenario for ATM by using the new commands but didn't work
out then i tried the old one and here is the configuration. let me know if i
did some thing wrong
R4------Ls1010--------R6
Switch
interface ATM1/0/0
no ip address
no ip directed-broadcast
logging event subif-link-status
atm ilmi-keepalive
!
interface ATM1/0/1
no ip address
no ip directed-broadcast
logging event subif-link-status
atm ilmi-keepalive
atm pvc 0 100 interface ATM1/0/0 0 100
!
R4
interface ATM0
ip address 192.168.1.1 255.255.255.0
map-group baleegh
atm pvc 1 0 100 aal5snap
no atm ilmi-keepalive
!
ip classless
no ip http server
!
!
map-list baleegh
ip 192.168.1.2 atm-vc 1 broadcast
R6
interface ATM0/0
ip address 192.168.1.2 255.255.255.0
map-group baleegh
atm pvc 1 0 100 aal5snap
no atm ilmi-keepalive
!
interface Ethernet2/0
no ip address
shutdown
half-duplex
!
ip classless
ip http server
!
!
map-list baleegh
ip 192.168.1.1 atm-vc 1 broadcast
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:19 GMT-3