From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sat Mar 23 2002 - 16:29:45 GMT-3
is the "ping self" important. or we just can skip it.
As my config and urs are just same except the self ping. anyways i will try
it.
-Mamoor
----- Original Message -----
From: Bernard <dollar@lvcm.com>
To: <ccielab@groupstudy.com>
Cc: 'Ahmed Mamoor Amimi' <mamoor@ieee.org>
Sent: Saturday, March 23, 2002 10:57 PM
Subject: RE: please help me out ATM
> Copy & paste the following configs.
> They come from a working configuration.
> R1 uses the older version of IOS and R2 uses the new IOS.
>
> HTH
>
> Bernard
>
>
> R1_7000# Version 11.3T
> interface ATM2/0
> ip address 10.100.1.1 255.255.255.0
> map-group test-a
> atm pvc 1 0 32 aal5snap
> atm ilmi-keepalive
>
> map-list test-a
> ip 10.100.1.1 atm-vc 1 broadcast o-- To ping self
> ip 10.100.1.2 atm-vc 1 broadcast
>
>
> R2_4700# Version 12.0
> interface ATM0
> ip address 10.100.1.2 255.255.255.0
> pvc 0/32
> protocol ip 10.100.1.1 broadcast
> protocol ip 10.100.1.2 broadcast o To ping self
>
> LS1010
>
> interface ATM11/1/1 o connected to R1_7000
> no ip address
> no ip directed-broadcast
> no atm ilmi-keepalive
>
> interface ATM11/1/2 o connected to R2_4700
> no ip address
> no ip directed-broadcast
> no atm ilmi-keepalive
> ! note: the following command needed on one interface only
> atm pvc 0 32 interface ATM11/1/1 0 32
>
>
> Bernard Omrani
>
>
>
>
> > -----Original Message-----
> > From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> > Sent: Saturday, March 23, 2002 9:19 AM
> > To: ccielab@groupstudy.com
> > Subject: please help me out
> >
> > Dear folks.
> >
> > Its my first time on ATM so please help me out in this.... I wanted to
> > configure the some scenario for ATM by using the new commands but didn't
> > work
> > out then i tried the old one and here is the configuration. let me know
if
> > i
> > did some thing wrong
> >
> > R4------Ls1010--------R6
> >
> >
> > Switch
> >
> > interface ATM1/0/0
> > no ip address
> > no ip directed-broadcast
> > logging event subif-link-status
> > atm ilmi-keepalive
> > !
> > interface ATM1/0/1
> > no ip address
> > no ip directed-broadcast
> > logging event subif-link-status
> > atm ilmi-keepalive
> > atm pvc 0 100 interface ATM1/0/0 0 100
> > !
> >
> >
> > R4
> >
> > interface ATM0
> > ip address 192.168.1.1 255.255.255.0
> > map-group baleegh
> > atm pvc 1 0 100 aal5snap
> > no atm ilmi-keepalive
> > !
> > ip classless
> > no ip http server
> > !
> > !
> > map-list baleegh
> > ip 192.168.1.2 atm-vc 1 broadcast
> >
> > R6
> >
> > interface ATM0/0
> > ip address 192.168.1.2 255.255.255.0
> > map-group baleegh
> > atm pvc 1 0 100 aal5snap
> > no atm ilmi-keepalive
> > !
> > interface Ethernet2/0
> > no ip address
> > shutdown
> > half-duplex
> > !
> > ip classless
> > ip http server
> > !
> > !
> > map-list baleegh
> > ip 192.168.1.1 atm-vc 1 broadcast
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:20 GMT-3