From: Zakir A (procket1@xxxxxxxxxxx)
Date: Sat Mar 23 2002 - 00:43:29 GMT-3
When a lab gives me spid numbers for R2, do I put them on R2 or R1?
I know that if they gave me strings, I would use the OTHER routers string on
my dialer map.
However, I do not know what to do with spids...and don't have the money to
waste to find out.
Thanks.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Rahmlow, Howard F.
Sent: Wednesday, March 13, 2002 12:10 PM
To: 'Tony ng'; ccielab@groupstudy.com
Subject: RE: simline 2 ISDN simulator
No spids needed
switch-type basic-net3
-----Original Message-----
From: Tony ng [mailto:vpnhacker@hotmail.com]
Sent: Wednesday, March 13, 2002 1:55 PM
To: ccielab@groupstudy.com
Subject: simline 2 ISDN simulator
Does any have experiece with this device? From the router, ISDN BRI
interface shows layer 1,2 are all active but I can't get the spids to work?
Does this require specific "ISDN switch-type"?
Thanks
Tony Ng
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:19 GMT-3