From: Carl Phelan (carlphelan@xxxxxxxxxxx)
Date: Thu Mar 21 2002 - 10:32:06 GMT-3
Hi All,
Does anyone have a basic configuration to test voice on the same router
i.e. ring another phone attached to the other fxs port. I have 2 fxs
ports, 1/1/0 and 1/1/1 and I have used the following configuration:
dial-peer voice 1 pots
destination-pattern 911
port 1/1/0
!
dial-peer voice 2 pots
destination-pattern 922
port 1/1/1
!
I have added a session target command although this may not be needed as
ports are local - or is that the case?:
dial-peer voice 111 voip
destination-pattern 911
session target ipv4:35.0.0.1
!
!
!
interface Loopback0
ip address 35.0.0.1 255.255.255.255
It appears both phones are attached logically to the same port 1/1/1,
dialling 922 brings up an engaged tone on both and 911 rings out. Is it
possible in the first place to test voice this way?
Many thanks for your advice.
Carl
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:16 GMT-3