From: Manny Gonzalez (gonzalu@xxxxxxx)
Date: Tue Mar 19 2002 - 17:19:19 GMT-3
But he is not doing AREA 0 authentication... why would he need that?
"Rahmlow, Howard F." wrote:
>
> You also need to add,
> area 0 auth mess....
> in your ospf section
>
> -----Original Message-----
> From: Khan Munib [mailto:Munib.Khan@icl.com]
> Sent: Tuesday, March 19, 2002 12:05 PM
> To: 'armreg@netscape.net'; ccielab@groupstudy.com
> Subject: RE: OSPF network - area 20 Question
>
> As you are using authentication, you must add the authentication string
> after the virtual link command also.
>
> e.g. area 1 virtual-link 140.4.2.1 message-digest-key 1 md5 cisco.
>
> Dont forget this has to be done on both sides of the virtual link. R2 and
> R3. Let me know if that helps.
>
> -----Original Message-----
> From: armreg@netscape.net [mailto:armreg@netscape.net]
> Sent: 19 March 2002 16:42
> To: ccielab@groupstudy.com
> Subject: OSPF network - area 20 Question
>
> Hello Folks:
>
> Here is the diagram of the network
>
> AREA 0 L0 Area 0
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:13 GMT-3