From: Shadi (ccie@xxxxxxxxxxxxxxxx)
Date: Fri Mar 15 2002 - 16:36:21 GMT-3
Guys,
Am still stuck with the below scenario, I played with all solutions you can
think of, and still can make R1 ethernet ping R3 ethernet, I played with
frame-relay map bridge and still not working.
So please if you can test this scenario and ,"if it worked", please forward to
me the configs.
Shadi
----- Original Message -----
From: Shadi
To: ccielab
Sent: Thursday, March 07, 2002 11:47 AM
Subject: Bridging over frame-relay
Hi guys,
You have the below scenario,
(IPX network 1000)R1(s0)-------------Frame-relay
link---------------(s0)(R2)(e0)-------------Ethernet-(e0)(R3) (IPX network
1000)
I want to make R1 IPX network the same as R3 ethernet0, so I did bridging on
R2, but I could not ping R3 e0 from R1 or visa versa!!!
As if bridging does not work on frame-relay, I looked on the CCO and found
that i can make frame relay bridge on a map statment, but it didn't work too.
The command is: frame-relay map bridge <DLCI>
Anybody has any hints or ideas?
Shadi
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:10 GMT-3