From: Bruce Williams (bruce@xxxxxxxxxxxxxxxxxxxxxx)
Date: Fri Mar 15 2002 - 01:46:00 GMT-3
I am having a problem with Lab 2 in the "CCIE Lab Practice Kit" by Hutnik
and Satterlee. I have three IBGP routers that have connectivity through a
frame cloud:
152.1.10.9 is the Route Refletor
152..1.10.10 and 152.1.10.11 are the clients. When I do a show ip bgp
neighbors" on the route reflector the other two routers are established as
route reflector clients, but for some reason the route reflector is not
reflecting routes from one client to the other. Please check out these brief
configs of the three routers and tell me if I am missing something.
Here is the BGP config of the route reflector:
router bgp 100
no synchronization
network 152.1.9.0 mask 255.255.255.128
neighbor 152.1.10.10 remote-as 100
neighbor 152.1.10.10 route-reflector-client
neighbor 152.1.10.11 remote-as 100
neighbor 152.1.10.11 route-reflector-client
Here is the config for the two route-reflector clients:
router bgp 100
no synchronization
neighbor 152.1.10.9 remote-as 100
neighbor 152.1.12.2 remote-as 200
neighbor 152.1.12.2 distribute-list 1 out
neighbor 152.1.12.10 remote-as 200
neighbor 152.1.12.10 distribute-list 1 out
router bgp 100
no synchronization
network 152.1.9.0 mask 255.255.255.128
neighbor 152.1.10.9 remote-as 100
neighbor 152.1.11.2 remote-as 300
neighbor 152.1.11.2 route-map localonly in
Bruce Williams
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:09 GMT-3