From: Rthugo1@xxxxxxx
Date: Fri Mar 15 2002 - 01:03:28 GMT-3
In a message dated 3/14/2002 1:01:28 PM Central Standard Time,
tlovelace@terminix.com writes:
> Subj:516-CS Terminal Server
> Date:3/14/2002 1:01:28 PM Central Standard Time
> From:<A HREF="mailto:tlovelace@terminix.com">tlovelace@terminix.com</A>
> To:<A HREF="mailto:ccielab@groupstudy.com">ccielab@groupstudy.com</A>
> Sent from the Internet
>
Tim,
Do a sh term to check your settings...should be "transport input all"
Do a sh ver..............I'm running 9.21
On your Hyperterm settings, it should be 9600, 8, none, 1, hardware flow
control.
Also try this config:
line con 0
exec-timeout 120 0
line 1 16
exec-timeout 120 0
line vty 0 4
exec-timeout 120 0
password xxxx
no login
HTH,
Rob H. NP, DP, blah,blah,blah..............
**One more thing....if its low on memory, it will take a LONG time to come up
in a Hyperterminal window..........sometimes up to 10-15 minutes........be
patient.
>
>
> I recently purchased a 516-CS terminal server off of eBay. When it arrived
> it booted up fine, but I did not know the password. I followed the password
> recovery procedures on CCO and recovered the password just fine. Now when I
> boot the box it will not boot unless I go into default mode like I would
> for
> password recovery. Also when I add the loopback interface and bring up the
> ethernet interface, sh ip route has no routes in it. Can anyone offer any
> help on these two items?
>
> Thanks
> Tim
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:09 GMT-3