From: Todd Carswell (acarswell@xxxxxxxxx)
Date: Thu Mar 14 2002 - 01:07:22 GMT-3
Very good info, guys. I'll know next time not to try to do something off
the top of my head! :-)
Thanks!
Todd Carswell
----- Original Message -----
From: "Brian Lodwick" <xpranax@hotmail.com>
To: <kghost@chollian.net>; <ccielab@groupstudy.com>
Sent: Wednesday, March 13, 2002 10:26 PM
Subject: Re: r6 included -> Re: Translational Bridging is driving me nuts!!!
CONFIG
> You're right, I am incorrect in my explaination in the part where I said:
> 0A10.0041.006A.0642.00A0
> next the packet hits bridge 10 (Pseudo-ring number of the transparent
> bridge)
>
> As you said Jaeheon this number (10) refers to the portion in the
> source-bridge command on the interface saying:
> source-bridge 6 10 100
> And the end point ring referrence is actually the pseudo-ring number of
the
> transparent bridge.
>
> Good catch, thanks for pointing that out!
>
> >>>Brian
>
>
> >From: "Jaeheon Yoo" <kghost@chollian.net>
> >Reply-To: "Jaeheon Yoo" <kghost@chollian.net>
> >To: "ccielab" <ccielab@groupstudy.com>, "Brian Lodwick"
> ><xpranax@hotmail.com>
> >Subject: Re: r6 included -> Re: Translational Bridging is driving me
> >nuts!!! CONFIG
> >Date: Thu, 14 Mar 2002 11:29:48 +0900
> >
> >Hi, Brian
> >
> >Thanks! This is very good and detailed explanation and it helps me a lot.
> >But I want to make one thing clear here.
> >
> >My understanding is like this:
> >
> > 0A10.0041.006A.0642.00A0
> >
> > ring 4 -> bridge 1 -> ring 6 -> bridge 10 -> ring 100 -> bridge 2 ->
> >ring 10
> >
> >So in this diagram, bridge "10" is from "source-bridge 6 10 100" under
the
> >tokenring interface.
> >and the last ring "10" is from "source transparent 100 10 2 1" as a
global
> >command.
> >
> >Please correct me if I'm wrong.
> >
> >Jaeheon
> >
> >(If IOS allowed us to use source-bridge command under an ethernet
> >interface, this would be much simpler, then we would just have to add
> >"source-bridge 10 2 100" under an ethernet interface along with a normal
> >"bridge-group" command. Don't you think this is more intuitive)
> >
> > > r4 first sends onto local ring 4
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits bridge 1
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits ring 6
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits bridge 10 (Pseudo-ring number of the transparent
> > > bridge)
> >
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits ring number 64 (Hex 64 = Decimal 100 =
ring-group)
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits bridge number 2 (Bridge number to the transparent
> > > bridge)
> > > 0A10.0041.006A.0642.00A0
> > > and lastly the packet arrives on the destination "ring" 10
> > >
> >
> >
> >----- Original Message -----
> >From: "Brian Lodwick" <xpranax@hotmail.com>
> >To: <acarswell@nc.rr.com>; <vze2hq65@verizon.net>
> >Cc: <ccielab@groupstudy.com>
> >Sent: Thursday, March 14, 2002 9:04 AM
> >Subject: Re: r6 included -> Re: Translational Bridging is driving me
> >nuts!!! CONFIG
> >
> >
> > > Here is the output from the router:
> > >
> > > r6(config)#source-bridge transparent ?
> > > <1-4095> Source-route ring group attached to the transparent bridge
> > >
> > > r6(config)#source-bridge transparent 100 ?
> > > <1-4095> Pseudo-ring number of the transparent bridge
> > > fastswitch Enable/disable fastswitching on sr/tlb bridge
> > >
> > > r6(config)#source-bridge transparent 100 10 ?
> > > <1-15> Bridge number to the transparent bridge
> > >
> > > r6(config)#source-bridge transparent 100 10 2 ?
> > > <1-255> Transparent bridge group attached to the virtual ring
> > >
> > >
> > > If we take a look at the show commands I added below you can see that
r6
> > > includes bridge-group 1 within its ring-group:
> > >
> > > (clipped from r6# show source-bridge)
> > > Ring Group 100:
> > > No TCP peername set, TCP transport disabled
> > > Maximum output TCP queue length, per peer: 100
> > > Rings:
> > > bn: 2 rn: 10 locvrt ma: 400a.cec6.2507 Bridge-group 1 fwd:
104
> > > bn: 10 rn: 6 local ma: 400a.cec6.2587 TokenRing0/0 fwd:
105
> > >
> > > And you can also see that r6 includes ring-group 100 within
bridge-group
> >1:
> > >
> > > (clipped from r6# show bridge)
> > > Bridge Group 1:
> > >
> > > Address Action Interface Age RX count TX count
> > > 0000.0c4a.99c6 forward Ethernet0/0 2 113 104
> > > 00e0.1ee7.fd92 forward Ethernet0/0 0 18 0
> > > 0000.0c09.8f2c forward RingGroup100 2 107 105
> > >
> > > And you can also see on the show rif command on r4
> > >
> > > r4#sh rif
> > > Codes: * interface, - static, + remote
> > > Dst HW AddrSrc HW Addr How Idle(min) Vlan Routing Information Field
> > > 0005.772b.8c82 N/A To0 0 - -
> > > 0000.3090.f134 N/A To0 * - -
> > > 0000.3052.9963 N/A To0 0 - - 0A10.0041.006A.0642.00A0
> > >
> > > MAC address 0000.3052.9963 = r3's ethernet interface IP addressed
> >34.0.0.3.
> > >
> > > r4#sh arp
> > > Protocol Address Age (min) Hardware Addr Type Interface
> > > Internet 34.0.0.3 0 0000.3052.9963 SNAP
TokenRing0
> > > Internet 34.0.0.4 - 0000.3090.f134 SNAP
TokenRing0
> > >
> > >
> > > Let's read the RIF back most of the numbers I've used are the same in
> >hex as
> > > they are in decimal so it's not too bad (I've copied the RIF above
each
> >line
> > > of text to correlate it's ring or bridge number to the RIF):
> > >
> > > 0A10.0041.006A.0642.00A0
> > > r4 first sends onto local ring 4
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits bridge 1
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits ring 6
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits bridge 10 (Pseudo-ring number of the transparent
> > > bridge)
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits ring number 64 (Hex 64 = Decimal 100 =
ring-group)
> > > 0A10.0041.006A.0642.00A0
> > > next the packet hits bridge number 2 (Bridge number to the transparent
> > > bridge)
> > > 0A10.0041.006A.0642.00A0
> > > and lastly the packet arrives on the destination "ring" 10
> > >
> > >
> > > >>>Brian
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > >From: "Todd Carswell" <acarswell@nc.rr.com>
> > > >To: "Brian Lodwick" <xpranax@hotmail.com>, <vze2hq65@verizon.net>
> > > >CC: <ccielab@groupstudy.com>
> > > >Subject: Re: r6 included -> Re: Translational Bridging is driving me
> > > >nuts!!! CONFIG
> > > >Date: Wed, 13 Mar 2002 18:25:06 -0500
> > > >
> > > >Shouldn't the source-bridge command look like this...
> > > >
> > > >"source-bridge transparent 2 10 100"
> > > >
> > > >I'm doing this off the top of my head, but I seem to remember that
the
> > > >target ring number should be the 3rd number in the command. In your
> > > >config,
> > > >you have the target ring number first. Am I right?
> > > >
> > > >One more thing... Your interface command, "bridge-group X" should
> >point to
> > > >the middle number, which is the bridge number. The way you have it
> > > >configured, you should have typed in "bridge-group 10".
> > > >
> > > >Again, I'm doing this off the top of my head, so don't berate me!
:-)
> > > >
> > > >Todd Carswell
> > > >
> > > >
> > > >
> > > >
> > > >----- Original Message -----
> > > >From: "Brian Lodwick" <xpranax@hotmail.com>
> > > >To: <vze2hq65@verizon.net>
> > > >Cc: <ccielab@groupstudy.com>
> > > >Sent: Wednesday, March 13, 2002 5:02 PM
> > > >Subject: r6 included -> Re: Translational Bridging is driving me
> >nuts!!!
> > > >CONFIG
> > > >
> > > >
> > > > > I can't believe I left out the most important piece of the puzzle,
I
> >was
> > > >in
> > > > > a hurry.
> > > > > Sorry about that.
> > > > >
> > > > >
> > > > > r6#sh run
> > > > > Building configuration...
> > > > >
> > > > > Current configuration:
> > > > > !
> > > > > version 12.0
> > > > > service timestamps debug uptime
> > > > > service timestamps log uptime
> > > > > no service password-encryption
> > > > > !
> > > > > hostname r6
> > > > > !
> > > > > !
> > > > > ip subnet-zero
> > > > > no ip routing
> > > > > no ip domain-lookup
> > > > > !
> > > > > voice-port 1/0/0
> > > > > !
> > > > > voice-port 1/1/0
> > > > > !
> > > > > voice-port 1/0/1
> > > > > !
> > > > > voice-port 1/1/1
> > > > > !
> > > > > partition flash 2 8 8
> > > > > !
> > > > > !
> > > > > source-bridge ring-group 100
> > > > > source-bridge transparent 100 10 2 1
> > > > > !
> > > > > !
> > > > > interface Ethernet0/0
> > > > > no ip address
> > > > > no ip directed-broadcast
> > > > > no ip route-cache
> > > > > no ip mroute-cache
> > > > > bridge-group 1
> > > > > !
> > > > > interface Serial0/0
> > > > > no ip address
> > > > > no ip directed-broadcast
> > > > > no ip route-cache
> > > > > no ip mroute-cache
> > > > > shutdown
> > > > > !
> > > > > interface TokenRing0/0
> > > > > no ip address
> > > > > no ip directed-broadcast
> > > > > no ip route-cache
> > > > > no ip mroute-cache
> > > > > ring-speed 16
> > > > > source-bridge 6 10 100
> > > > > source-bridge spanning
> > > > > !
> > > > > ip classless
> > > > > !
> > > > > !
> > > > > bridge 1 protocol ieee
> > > > > bridge 1 bitswap_layer3_addresses
> > > > > alias exec ip sh ip route
> > > > > alias exec int sh ip int brief
> > > > > alias exec ipx sh ipx route
> > > > > !
> > > > > line con 0
> > > > > transport input none
> > > > > line aux 0
> > > > > line vty 0 4
> > > > > login
> > > > > !
> > > > > end
> > > > >
> > > > > Here's some other good stuff you can use to see the RIF
information
> >so
> > > >that
> > > > > you can take the MAC address and ring information to practice
> >reading
> > > >RIF's.
> > > > >
> > > > > r4#sh int tok 0
> > > > > TokenRing0 is up, line protocol is up
> > > > > Hardware is TMS380, address is 0000.3090.f134 (bia
0000.3090.f134)
> > > > > Internet address is 34.0.0.4/24
> > > > > MTU 1500 bytes, BW 16000 Kbit, DLY 630 usec,
> > > > > reliability 255/255, txload 1/255, rxload 1/255
> > > > > Encapsulation SNAP, loopback not set
> > > > >
> > > > > r4#sh arp
> > > > > Protocol Address Age (min) Hardware Addr Type
> >Interface
> > > > > Internet 34.0.0.3 0 0000.3052.9963 SNAP
> >TokenRing0
> > > > > Internet 34.0.0.4 - 0000.3090.f134 SNAP
> >TokenRing0
> > > > >
> > > > > r4#sh rif
> > > > > Codes: * interface, - static, + remote
> > > > >
> > > > > Dst HW Addr Src HW Addr How Idle(min) Vlan Routing
> >Information
> > > >Field
> > > > > 0005.772b.8c82 N/A To0 0 - -
> > > > > 0000.3090.f134 N/A To0 * - -
> > > > > 0000.3052.9963 N/A To0 0 -
> > > >0A10.0041.006A.0642.00A0
> > > > >
> > > > > r3#sh int e0
> > > > > Ethernet0 is up, line protocol is up
> > > > > Hardware is Lance, address is 0000.0c4a.99c6 (bia
0000.0c4a.99c6)
> > > > > Internet address is 34.0.0.3/24
> > > > > MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load
> >1/255
> > > > > Encapsulation ARPA, loopback not set, keepalive set (10 sec)
> > > > >
> > > > > r3#sh arp
> > > > > Protocol Address Age (min) Hardware Addr Type
> >Interface
> > > > > Internet 34.0.0.3 - 0000.0c4a.99c6 ARPA
> >Ethernet0
> > > > > Internet 34.0.0.4 1 0000.0c09.8f2c ARPA
> >Ethernet0
> > > > >
> > > > >
> > > > > r6#sh bridge
> > > > >
> > > > > Total of 300 station blocks, 297 free
> > > > > Codes: P - permanent, S - self
> > > > >
> > > > > Bridge Group 1:
> > > > >
> > > > > Address Action Interface Age RX count TX
count
> > > > > 0000.0c4a.99c6 forward Ethernet0/0 2 113
104
> > > > > 00e0.1ee7.fd92 forward Ethernet0/0 0 18
0
> > > > > 0000.0c09.8f2c forward RingGroup100 2 107
105
> > > > >
> > > > >
> > > > > r6#sh rif
> > > > > Codes: * interface, - static, + remote
> > > > >
> > > > > Dst HW Addr Src HW Addr How Idle (min) Routing
> >Information
> > > >Field
> > > > > 4000.0000.2000 N/A - 0 -
> > > > > 0000.3090.f134 N/A BG1 2
> > > >0A90.0041.006A.0642.00A0
> > > > > 0000.3052.9963 N/A To0/0 4
> >0890.00A2.064A.0060
> > > > > 000a.cec6.2587 N/A To0/0 * -
> > > > >
> > > > >
> > > > > r6#sh source-bridge
> > > > >
> > > > > Local Interfaces: receive transmit
> > > > > srn bn trn r p s n max hops cnt cnt
> > > >drops
> > > > > To0/0 6 10 100 * f 7 7 7 104 134
> > > >0
> > > > >
> > > > > Global RSRB Parameters:
> > > > > TCP Queue Length maximum: 100
> > > > >
> > > > > Ring Group 100:
> > > > > No TCP peername set, TCP transport disabled
> > > > > Maximum output TCP queue length, per peer: 100
> > > > > Rings:
> > > > > bn: 2 rn: 10 locvrt ma: 400a.cec6.2507 Bridge-group 1
fwd:
> >104
> > > > > bn: 10 rn: 6 local ma: 400a.cec6.2587 TokenRing0/0
fwd:
> >105
> > > > >
> > > > > Explorers: ------- input ------- -------
output -------
> > > > > spanning all-rings total spanning all-rings
> >total
> > > > > To0/0 3 0 3 29 0
> > 29
> > > > >
> > > > > Explorer fastswitching enabled
> > > > > Local switched: 14 flushed 0 max Bps 38400
> > > > >
> > > > > rings inputs bursts throttles output
> >drops
> > > > > To0/0 0 0 0
> > 0
> > > > >
> > > > >
> > > > >
> > > > > >From: Anand Ghody <vze2hq65@verizon.net>
> > > > > >To: Brian Lodwick <xpranax@hotmail.com>
> > > > > >CC: ccielab@groupstudy.com
> > > > > >Subject: Re: Translational Bridging is driving me nuts!!! CONFIG
> > > > > >Date: Wed, 13 Mar 2002 15:54:02 -0500
> > > > > >
> > > > > >Brian,
> > > > > >
> > > > > > I may have missed it, put could to show me the config of the
> > > > > >translational bridge (r6). Thnaks.
> > > > > >
> > > > > >Anand
> > > > > >
> > > > > >
> > > > > >Brian Lodwick wrote:
> > > > > >
> > > > > >>A little while back there was a question to the list talking
about
> > > > > >>translational bridging and there was some controversy if you
could
> > > > > >>send layer-3 traffic through a router serving as a translational
> > > >bridge.
> > > > > >>
> > > > > >>I also said I would lab it up for the original person who posted
> >their
> > > > > >>config to prove that you can.
> > > > > >>
> > > > > >>So here it is.
> > > > > >>My setup:
> > > > > >>
> > > > > >>r3)e0 -----CAT5000----- e0/0(r6)tok0/0 -----CAT3920---- tok0(r4
> > > > > >>
> > > > > >>
> > > > > >>r3's ethernet 0 interface is addressed 34.0.0.3 255.255.255.0
> > > > > >>r4's token-ring 0 interface is addressed 34.0.0.4 255.255.255.0
> > > > > >>
> > > > > >>r3#ping
> > > > > >>Protocol [ip]:
> > > > > >>Target IP address: 34.0.0.4
> > > > > >>Repeat count [5]: 100
> > > > > >>Datagram size [100]:
> > > > > >>Timeout in seconds [2]:
> > > > > >>Extended commands [n]:
> > > > > >>Sweep range of sizes [n]:
> > > > > >>Type escape sequence to abort.
> > > > > >>Sending 100, 100-byte ICMP Echos to 34.0.0.4, timeout is 2
> >seconds:
> > > > >
> > >>!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> > > > > >>!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> > > > > >>Success rate is 100 percent (100/100), round-trip min/avg/max =
> >8/9/12
> > > >ms
> > > > > >>
> > > > > >>r4#ping
> > > > > >>Protocol [ip]:
> > > > > >>Target IP address: 34.0.0.3
> > > > > >>Repeat count [5]: 100
> > > > > >>Datagram size [100]:
> > > > > >>Timeout in seconds [2]:
> > > > > >>Extended commands [n]:
> > > > > >>Sweep range of sizes [n]:
> > > > > >>Type escape sequence to abort.
> > > > > >>Sending 100, 100-byte ICMP Echos to 34.0.0.3, timeout is 2
> >seconds:
> > > > >
> > >>!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> > > > > >>!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> > > > > >>Success rate is 100 percent (100/100), round-trip min/avg/max =
> >4/9/12
> > > >ms
> > > > > >>
> > > > > >>
> > > > > >>Below are the configs from all routers and switches:
> > > > > >>
> > > > > >>r3#sh run
> > > > > >>Building configuration...
> > > > > >>
> > > > > >>Current configuration:
> > > > > >>!
> > > > > >>version 12.0
> > > > > >>service timestamps debug uptime
> > > > > >>service timestamps log uptime
> > > > > >>no service password-encryption
> > > > > >>!
> > > > > >>hostname r3
> > > > > >>!
> > > > > >>!
> > > > > >>ip subnet-zero
> > > > > >>no ip domain-lookup
> > > > > >>!
> > > > > >>!
> > > > > >>!
> > > > > >>interface Ethernet0
> > > > > >>ip address 34.0.0.3 255.255.255.0
> > > > > >>no ip directed-broadcast
> > > > > >>!
> > > > > >>interface Serial0
> > > > > >>no ip address
> > > > > >>no ip directed-broadcast
> > > > > >>encapsulation frame-relay
> > > > > >>no ip mroute-cache
> > > > > >>no fair-queue
> > > > > >>!
> > > > > >>interface Serial0.301 point-to-point
> > > > > >>ip address 10.0.0.3 255.255.255.0
> > > > > >>no ip directed-broadcast
> > > > > >>frame-relay interface-dlci 301 protocol ip 10.0.0.1
> > > > > >>!
> > > > > >>interface Serial1
> > > > > >>no ip address
> > > > > >>no ip directed-broadcast
> > > > > >>shutdown
> > > > > >>!
> > > > > >>ip classless
> > > > > >>!
> > > > > >>alias exec ip sh ip route
> > > > > >>alias exec int sh ip int brief
> > > > > >>alias exec ipx sh ipx route
> > > > > >>!
> > > > > >>line con 0
> > > > > >>transport input none
> > > > > >>line aux 0
> > > > > >>line vty 0 4
> > > > > >>login
> > > > > >>!
> > > > > >>end
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >>r4#sh run
> > > > > >>Building configuration...
> > > > > >>
> > > > > >>Current configuration : 857 bytes
> > > > > >>!
> > > > > >>version 12.2
> > > > > >>no service single-slot-reload-enable
> > > > > >>service timestamps debug uptime
> > > > > >>service timestamps log uptime
> > > > > >>no service password-encryption
> > > > > >>!
> > > > > >>hostname r4
> > > > > >>!
> > > > > >>logging rate-limit console 10 except errors
> > > > > >>!
> > > > > >>ip subnet-zero
> > > > > >>no ip finger
> > > > > >>no ip domain-lookup
> > > > > >>!
> > > > > >>no ip dhcp-client network-discovery
> > > > > >>!
> > > > > >>!
> > > > > >>!
> > > > > >>!
> > > > > >>interface Serial0
> > > > > >>no ip address
> > > > > >>encapsulation frame-relay
> > > > > >>!
> > > > > >>interface Serial0.401 point-to-point
> > > > > >>ip address 10.0.0.4 255.255.255.0
> > > > > >>frame-relay interface-dlci 401 protocol ip 10.0.0.1
> > > > > >>!
> > > > > >>interface Serial1
> > > > > >>no ip address
> > > > > >>shutdown
> > > > > >>!
> > > > > >>interface TokenRing0
> > > > > >>mtu 1500
> > > > > >>ip address 34.0.0.4 255.255.255.0
> > > > > >>ring-speed 16
> > > > > >>multiring all
> > > > > >>!
> > > > > >>ip kerberos source-interface any
> > > > > >>ip classless
> > > > > >>ip http server
> > > > > >>!
> > > > > >>!
> > > > > >>alias exec ip sh ip route
> > > > > >>alias exec int sh ip int brief
> > > > > >>alias exec ipx sh ipx route
> > > > > >>!
> > > > > >>line con 0
> > > > > >>transport input none
> > > > > >>line aux 0
> > > > > >>line vty 0 4
> > > > > >>login
> > > > > >>!
> > > > > >>end
> > > > > >>
> > > > > >>(r6 tok0/0 is plugged into port 4 on the 3920, and r4 tok0 is
> >plugged
> > > > > >>into port 2 on the 3920)
> > > > > >>
> > > > > >>TrBRF/TrCRF ID Brdg/Rng Ports
Local
> > > >State
> > > > > >>Bridge1 10 0x01
> >preferred
> > > > > >> Ring4 15 0x04 yes
> >preferred
> > > > > >> Ring6 20 0x06 yes
> >preferred
> > > > > >>
> > > > > >>
> > > > > >>Port Mode TrCRF TrBRF
> > > > > >> 1 Static trcrf-default trbrf-default
> > > > > >> 2 Static Ring4 Bridge1
> > > > > >> 3 Static trcrf-default trbrf-default
> > > > > >> 4 Static Ring6 Bridge1
> > > > > >>
> > > > > >>
> > > > > >>VLAN ID 10
> > > > > >>VLAN Name Bridge1
> > > > > >>State Operational
> > > > > >>MTU 1500
> > > > > >>Bridge Number 0x01
> > > > > >>
> > > > > >>
> > > > > >>VLAN ID 15
> > > > > >>VLAN Name Ring4
> > > > > >>Parent VLAN Bridge1
> > > > > >>State Operational
> > > > > >>Ring Number 0x04
> > > > > >>Bridging Mode SRB
> > > > > >>Max ARE Bridge Hop Count 7
> > > > > >>Max STE Bridge Hop Count 7
> > > > > >>Backup CRF No
> > > > > >>Ports in TrCRF 2
> > > > > >>
> > > > > >>
> > > > > >>VLAN ID 20
> > > > > >>VLAN Name Ring6
> > > > > >>Parent VLAN Bridge1
> > > > > >>State Operational
> > > > > >>Ring Number 0x06
> > > > > >>Bridging Mode SRB
> > > > > >>Max ARE Bridge Hop Count 7
> > > > > >>Max STE Bridge Hop Count 7
> > > > > >>Backup CRF No
> > > > > >>Ports in TrCRF 4
> > > > > >>
> > > > > >>(r6 eth0/0 is plugged into port 3/3 on the CAT5000, and r3 eth0
is
> > > > > >>plugged into port 3/1 on the CAT5000) this stuff really has no
> >bearing
> > > > > >>except ofcourse the ports need to be in the same VLAN. Nothing
> > > > > >>different on the CAT5000.
> > > > > >>
> > > > > >>
> > > > > >>cat5 (enable) sh vlan
> > > > > >>VLAN Name Status IfIndex
Mod/Ports,
> > > >Vlans
> > > > > >>---- -------------------------------- --------- -------
> > > > > >>------------------------
> > > > > >>1 default active 91 1/1-2
> > > > > >>
> >3/1,3/3,3/7-12
> > > > > >>2 VlanA active 96
> > > > > >>3 VlanB active 97 3/6
> > > > > >>4 VlanC active 98 3/5
> > > > > >>10 VLAN0010 active 99 3/2,3/4
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >>>>>Brian
> > > > > >>>>
> > > > > >>
> > > > > >>
> > > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:04 GMT-3