From: John Neiberger (neiby@xxxxxxxxxx)
Date: Wed Mar 13 2002 - 20:47:09 GMT-3
If your routing protocol is permitted in the dialer list,
wouldn't it be continually resetting the idle timeout?
Hmm... Add one more thing to the list of things I need to brush
up on real soon. :-)
John
---- On Wed, 13 Mar 2002, DAN DORTON (DHSTS68@dhs.state.il.us)
wrote:
> Yes,
>
> I ran across a similar issue & my good buddy Morris busted me
out on it.
>
> I couldn't figure out for the life of me why my snapshot kept
going down
> & coming back up.
>
> He kept saying your snapshots broke & I kept saying... Nope!
Configured
> just like the CD says!
>
> Turns out I had a dialer idle-timeout of 20 seconds left in
there.
>
> Needless to say snapshot didn't have enough time to do it's
job & had to
> try again.... & again... & again... So on & so forth...
>
> So once again I looked like a fool! *sigh*
>
> Damn snapshot!
>
> Dan
>
> >>> "MOLINA, MARTIN J *Internet* (PBI)" <mm1343@pbi.net>
03/13/02
> 12:45PM >>>
> It appears as if I didn't configure the "idle-timeout" to be
long
> enough. I
> bumped it up to 500 and my issue went away.
>
> > -----Original Message-----
> > From: MOLINA, MARTIN J *Internet* (PBI)
> > Sent: Wednesday, March 13, 2002 10:32 AM
> > To: 'ccielab@groupstudy.com'
> > Subject: Snapshot stays active all the time
> >
> > Group,
> > I am running IGRP and I'm using physical BRI interface
configs for
> > Snapshot routing (5mins active, 8mins quiet). See config
briefs below.
> > Anybody know what I have done wrong? Right before snapshot
makes the
> > transition from active to quiet the client initiates
another call and
> the
> > active process is restarted. Thanks in advance.
> >
> > interface BRI0/0
> > ip address 10.1.1.2 255.255.255.0
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer idle-timeout 110
> > dialer map snapshot 1 name R3 broadcast 8358661
> > dialer map ip 10.1.1.3 name R3 broadcast 8358661
> > dialer map ip 10.1.1.3 name R3 broadcast 8358663
> > dialer load-threshold 1 either
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866201 8358662
> > isdn spid2 0835866401 8358664
> > snapshot client 5 8 suppress-statechange-update dialer
> > ppp authentication chap callin
> > ppp chap hostname marty
> > ppp multilink
> >
> > --------------------------------------------------
> > interface BRI0
> > ip address 10.1.1.3 255.255.255.0
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer idle-timeout 110
> > dialer map ip 10.1.1.2 name marty broadcast
> > dialer load-threshold 1 either
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866101 8358661
> > isdn spid2 0835866301 8358663
> > snapshot server 5
> > ppp authentication chap
> > ppp multilink
> >
> > Martin Molina
> > Senior Network Engineer
> > Pacific Bell Internet Services
> > CCNP CCDP
> > desk: 925 973-7774
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:04 GMT-3